THE PREMIER SERIES – MODIFICATIONS (continued)
MD — Modify Depth
The depth of most cabinets can be modified in ¼” increments. All drawers will remain standard depths. Adjustable shelving within wall and most Tall Cabinets will remain full depth when Modified Depth is applied. Cabinets with sliding shelves can not be reduced below 18” or above 27” depth. To obtain price, use the next larger or largest standard item available and add the specified percentage. Always reduce, if possible, from a larger cabinet. See
the Modification Chart for availability and sizing information. To order, use the following code with cabinet item code: MD — Modify Depth For Example: W3030 MD9 Depth Cabinet Type Minimum Maximum Walls without drawers 4½” 30” Walls with drawers 12” 30” Bases without drawers 6” 30” Bases with drawers 12” 30” Talls without drawers 6” 30” Talls with drawers 12” 30” Vanities without drawers 6” 30” Vanities with drawers 12” 30”
Pricing Add 23% to List Price INSET MD13 Pricing Add 10% to List Price
84, 87, 90, 93, 96
U248424 MD21
Sub-Back
12, 24 18
W3930 MD9
MTEP2484 MD18
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min. Max. MIN MAX
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • INS •
B30 MD30
MDIN — Mullion Doors Installed MDINTOP — Mullion Doors Installed Top MDINBTM — Mullion Doors Installed Bottom
Most wall and tall cabinets can be ordered with Mullion Doors Installed on the cabinet. All cope and tenon tall doors greater than 48” high will have a center rail and two panel openings. A pack of assorted shelf clips is included to align shelves with mullions. Matching Interior is not standard with this option; therefore, we recommend ordering cabinets with Finished Interior (FI) . See each door style page for door style availability.
W3630 2MDIN NG W3630 2MDIN, NG
Art, W3630 2MDIN.idw
When ordering MDIN, ALL standard doors will be replaced with mullion doors. When ordering MDINTOP, TOP standard doors will be replaced with mullion doors. When ordering MDINBTM, BOTTOM standard doors will be replaced with mullion doors. To order, use the following codes with cabinet item code:
1MDIN — One Mullion Door Installed 2MDIN — Two Mullion Doors Installed 3MDIN — Three Mullion Doors Installed 4MDIN — Four Mullion Doors Installed 6MDIN — Six Mullion Doors Installed 8MDIN — Eight Mullion Doors Installed For Example: W3630 2MDIN NG To order, use the following codes with cabinet item code: 1MDINTOP — One Mullion Door Installed on top 2MDINTOP — Two Mullion Doors Installed on top 3MDINTOP — Three Mullion Doors Installed on top 4MDINTOP — Four Mullion Doors Installed on top For Example: WSC3060 2MDINTOP SSG To order, use the following codes with cabinet item code: 1MDINBTM — One Mullion Door Installed on bottom 2MDINBTM — Two Mullion Doors Installed on bottom 3MDINBTM — Three Mullion Doors Installed on bottom 4MDINBTM — Four Mullion Doors Installed on bottom For Example: U308424 2MDINBTM SSG
DC2730 1MDIN CG
WSC3060 FIMDTOP TR CSG WSC3060 2MDINTOP SSG
These bullets apply to all Mullion Door Options: • Not available with Box Only or Void Door options. • Mullions in character maple and character cherry door styles will not have character features. • Glass options are non-tempered and therefore not recommended for use near interior and exterior doors. Glass patterns run vertically with the height of the door. • Not available on the following cabinets: 9” Wide cabinets or any open cabinets that do not come standard with doors. • Wide stile and rail door styles are not available with FIMD options for 9” wide, 12” wide single door or 24” wide double door cabinets. Cabinets must also be 15” high or higher. INSET: Available with Traditional Mullion Style only and for wall cabinets 15” high or higher and 15” wide or wider. Not available on 24” wide double door cabinets. DDF options are available. Note: To order replacement doors, use the Easy Parts Search Program on WAY. See page Premier–1–126 for Mullion Style and Glass Type options.
Art, WSC3060 FIMDTOP.idw
U308424 2MDINBTM SSG
Premier–1–132
Made with FlippingBook Online document maker