THE PREMIER SERIES — YOU DRAW IT PROGRAM (continued)
Extended End Panels Back
12
End panel of cabinet is extended back. Interior side of extension will match the cabinet interior and have an exposed dado running from front to back at the cabinet top and floor locations. This option is available in ¼” increments up to a maximum of 30” overall end panel depth.
Custom quote approval may be limited by engineering capabilities/boundaries Quote based on starting SKU plus any additional modifications
15
Flush Finished Bottom
This option is available on individual Wall cabinets only. It will create a flush finished bottom on the wall cabinet. Standard construction end panels will be ½” thick and cut ½” short. The ½” thick edge of the flush finished bottom will be exposed and will require covering if on the end of a run. If FCE is chosen, the end panel will be ¾” thick, full height and cover the flush finished bottom completely. Seams will still be present when joining multiple cabinets in a run. This option does not change the height of the cabinet.
Custom quote approval may be limited by engineering capabilities/boundaries Quote based on starting SKU plus any additional modifications
Flush Finished Bottom
Pipe Chase
This option allows for a three-sided notch to be cut into the back of a wall, base, tall or vanity cabinet. A sketch must be sent in using the You Draw It request form detailing all necessary dimensions for the location of the pipe chase. Dimensions may be specified down to 1 ⁄ 4 ” increments. If the cut out for the pipe chase is located in a cabinet with drawers, the drawers will become blank fronts. Base and vanity cabinets with this option will include a full top.
Custom quote approval may be limited by engineering capabilities/boundaries Quote based on starting SKU plus any additional modifications
Specialty Cabinet Ideas
Toe kick hidden step stool, a tall wastebasket cabinet, built-in under cabinet paper towel holder, unique interior storage kits, etc. can be accomplished using the You Draw It Program. Below are a few examples with more throughout the next several pages. Custom quote approval may be limited by engineering capabilities/boundaries. Quote based on starting SKU plus any additional modifications.
Utility Inverted Frame with Wastebasket Installed
Wastebasket Divider
Add a floor below the drawer to partition off the wastebasket.
Premier–1–164
Made with FlippingBook Online document maker