Premier Specification Catalog

MANTEL HOOD FAN AND LINER KITS

24” Deep Mantel Hood Fan and Liner Kits MHFLK5424 MHFLK6024 MHFLK6624 MHFLK7224 34 3 ⁄ 8 ” for TMS48, SMS48 or Larger (installation requires one SHV1296) 40 3 ⁄ 8 ” for TMS60, SMS60 or Larger (installation requires one SHV1296) 46 3 ⁄ 8 ” for TMS66, SMS66 or Larger (installation requires one SHV1296) 52 3 ⁄ 8 ” for TMS72, SMS72 or Larger (installation requires two SHV1296)

12

28 3 / 8 , 34 3 / 8 , 40 3 / 8 , 46 3 / 8

• Use with ID24 Wall Pullout Application • Manufactured by Vent-A-Hood • Liner and fan have stainless steel finish • One dual blower 600 CFM for 54”, 60” and 66” kits • Two dual blowers 1200 CFM for 72” kits • 8” Diameter duct size • Halogen lights included with unit • See shelving installation diagram below • For 72” kit, must order transition duct shown below • MHFLK5424 will fit 48” mantel • Mounting hardware not included, requires #8 x 5 ⁄ 8 ” screws • Top access to hood interior is required to complete installation. If not available, consider ordering the hood with the Removable Front option.

12

3

34 3 / 8 , 40 3 / 8 , 46 3 / 8 , 52 3 / 8

22 1 / 2

Liner Insert

MHFLK7224

27 3 / 4

27

MHFLKTD7224 Transition Duct

12

• Transition duct for use with MHFLK7224 only

16 1 / 2

15

15

30, 36, 42, 48 60, 66, 72, 78

8

8

MHFLK5421 MHFLK6021 MHFLK6621 MHFLK7221 21” Deep Mantel Hood Fan and Liner Kits

• Use with standard 21” depth Wall Pullout Application • Manufactured by Vent-A-Hood • Liner and fan have stainless steel finish • One dual blower 600 CFM • 8” Diameter duct size • Halogen lights included with unit • See shelving installation diagram below • MHFLK5421 will fit 48” mantel • Top access to hood interior is required to complete installation. If not available, consider ordering the hood with the Removable Front option.

12

28 3 / 8 , 34 3 / 8 , 40 3 / 8 , 46 3 / 8

12

3

34 3 ⁄ 8 ” for TMS48, SMS48 or Larger (installation requires one SHV1296) 40 3 ⁄ 8 ” for TMS60, SMS60 or Larger (installation requires one SHV1296) 46 3 ⁄ 8 ” for TMS66, SMS66 or Larger (installation requires one SHV1296) 52 3 ⁄ 8 ” for TMS72, SMS72 or Larger (installation requires two SHV1296)

34 3 / 8 , 40 3 / 8 , 46 3 / 8 , 52 3 / 8

19 1 / 4

Liner Insert INSTALLATION INFORMATION

S helving I nstallation D iagram

27 3 / 4

27

SHV cut to fit between Liner & Wall and between Wall Pullouts

15

15

30, 36, 42, 48 60, 66, 72, 78

27 3 /

SHV cut to fit behind NAV between Liner & Wall Pullout on both sides

4

27

30, 36, 42, 48

15

15

24

60, 66, 72, 78

21

S pecification D etails for P ower F an U nits Caution: Refer to Peninsula Hood Installation in Installation Manual.

30

27

When ordering any wood hood or mantel wood hood, it is the dealer’s responsibility to verify all fire codes in your area (fire codes vary from state to state and even from city to city). Hoods should be installed at a proper level over the range and installer should account for any special needs for cook tops and grills. Be sure to match hood liner width to ensure proper ventilation. Please note that these are only recommendations and you should always reference local building codes, fire codes and manufacturer specifications for final design/applications. Recommended distance from top of cooking surface to bottom of fan unit is 27”-30” depending on manufacturer range specifications and depth of cabinets. If installed beyond recommended distance, the fan unit will not perform effectively.

Premier–2–38

Made with FlippingBook Online document maker