SPICE DRAWER BASE CABINET
• Sides, top and bottom have 3 ⁄
4 ” plywood frameless
SDBC6
24
construction • Drawers are 1 ⁄
2 ” plywood with natural finish • Drawer fronts have an eased edge profile that complements door styles, but is not identical • Not for horizontal application • Cabinet has finished plywood ends • For MDF door styles, Spice Drawer Base Cabinet is painted hardwood • INSET: Will be FOL in design
5 Drawers
34 1 /
2
6
+9(>,9-965; :0+,796-03,
SINK BASE CABINETS FOL door styles have spacer added to back of drawer blank to make flush with doors.
SB18 L/R SB21 L/R SB24SD L/R
SB24 SB27 SB30
SB33 SB36
34 1 / 2
1 Drawer blank, 2 Doors w/o center mullion
34 1 /
2
1 Drawer blank, 1 Door
24
24, 27, 30, 33, 36
• Must specify L or R hinge
24
18, 21, 24
2 Drawers, 2 Drawer blanks, 4 Doors SB60 • Doors hinged Left, Left, Right, Right • INSET: Not available
SB39 SB42 2 Drawer blanks, 2 Doors SB45 SB48
33 15 /
16
34 1 / 2
34 1 /
2
39, 42, 45, 48
24
15
30
24
60
15
DESIGN NOTE Order with storage already built-in! See the Modification Section for more options.
WIDTH
HEIGHT
DEPTH
Min. 12”
Max. 48”
Min. 24”
Max. 48”
Min.
Max.
6” 30” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • • • • • • • ••••••••• •• s • • • • INS • • • • • • • ••••••••• •• s • • • •
SINK BASE MAT
BASE DRIP TRAYS ALMOND
SBM
BDTA3024 (trim for 27”) BDTA3624 (trim for 33”) BDTA4224 (trim for 39”)
24
• White polystyrene • Mat is used to protect the bottom of the sink base from water due to minor leaks only • Measures 21 1 ⁄ 2 ” D and 45 1 ⁄ 4 ” W • Trim to fit
45
1 /
21 1 /
4
2
• Trim to fit • For cabinets with center mullion, tray must be installed before countertop
30, 36, 42
BASE DRIP TRAYS GRAY
BDTG3024 (trim for 27”) BDTG3624 (trim for 33”) BDTG4224 (trim for 39”)
SINK BASE STORAGE SHELF
24
18
SBSS
18
• Trim to fit • For cabinets with center mullion, tray must be installed before countertop
• No floor • ½” Plywood
30, 36, 42
10
TOT36S-TOT48S
TILT OUT TRAYS TOT36S-TOT48S
TOT18S (for SB18) TOT21S (for SB21) TOT24S (for SB24 & SB24SD)
TOT36S (for SB36)* TOT39S (for SB39)* TOT42S (for SB42)* TOT45S (for SB45)* TOT48S (for SB48)* TOT60S (for SB60)*
• Stainless steel with Wellborn logo imprint • Includes two hinges per tray • INSET: Not available * Contains 2 trays
3
TOT27S (for SB27) TOT30S (for SB30)* TOT33S (for SB33)*
3
2 1 / 8
2 1 / 8
TOT36W
• Fits all SB cabinets • Trimmable to make two Tilt Outs • Includes a 36” wide white tray, two sets of hinges, two pair end caps and tube adhesive • INSET: Not available
36
Premier–3–8
Made with FlippingBook Online document maker