ICCS ISLAND COMPONENT CENTER SUPPORT 3 3
• Recommended for islands 36” wide or wider • Trimmable • Finish techniques are not included
34 1 / 2
ICCS
ISLAND COMPONENT SHELVES
16 1 / 2
ICS48 ICS51 ICS54 ICS72 ICS84 ICS96
ICS39 ICS42 ICS45 ICS57 ICS60 ICS63
• 3 ⁄ 4 ” Thick plywood shelf with CEMB moulding applied to all sides • Two support rails and brackets included for shelf support. Must be field installed. • Not trimmable • Must specify finish • For MDF door styles, shelf is painted hardwood • Reduced Depth option available in 3” increments to 15” When specifying RD actual depth remains 1 1 ⁄ 2 ” deeper than specified • Increased Depth option available in 3” increments to 48” When specifying ID actual depth remains 1 1 ⁄ 2 ” deeper than specified
3 3 / 4
39, 42, 45, 48, 51, 54, 57, 60, 63, 72, 84, 96
Actual widths are 1 1 ⁄
2 ” narrower than specified.
Note: When ordering component shelf, the overall dimension of the island will correspond with the correct shelf size. For example, if you are building a 39” wide island, order an ICS39 shelf.
• Finish techniques are not included
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min. 15”
Max.
48” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s • • INS s • •
Note: Islands and Island Components are not available on the Rush Program.
BUTCHER BLOCK ISLANDS WITH SHAKER LEGS
BUTCHER BLOCK ISLANDS WITH CLASSIC LEGS
• Functional 3 ⁄
4 ” solid wood drawer on front
BBI24SFL BBI30SFL BBI36SFL 1 Drawer
BBI24CFL BBI30CFL BBI36CFL 1 Drawer
• Legs are 2¾” wide • Butcher block top included in price but shipped unattached for field installation. Butcher block is 26” deep x 1 1 ⁄ 2 ” thick solid maple
*
*
and extends 1” beyond cabinet (not including drawer) • Void Top option available — Specify VT when ordering • Void Top option allows for field installed decorative tops (field installed tops should not exceed 100 pounds) • INSET: Will be one piece in design * 18 1 ⁄ 2 ” W x 5 1 ⁄ 2 ” H inside dimension
24
*
34 1 / 2
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
24
24, 30, 36
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s s • INS s s •
Void Top Option
ISLAND END CAP WITH SHAKER LEGS
ISLAND END CAP WITH CLASSIC LEGS
• Functional 3 ⁄
4 ” solid wood drawer on front
IEC24SFL IEC30SFL IEC36SFL
IEC24CFL IEC30CFL IEC36CFL 1 Drawer
18
18
• Legs are 2¾” wide • Bead Board Back option available • INSET: Will be one piece in design * 12 1 ⁄ 2 ” W x 5 1 ⁄ 2 ” H inside dimension
*
*
34 1 ⁄ 2
34 1 ⁄ 2
1 Drawer
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
24, 30, 36
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s s • INS s s •
24, 30, 36
ISLAND ENDS
IEP33426SKR IEP33438SKR IEP33450SKR IEP63426SKR IEP63438SKR IEP63450SKR
26” - use with 24” deep islands 38” - use with 36” deep islands 50” - use with 48” deep islands
Island End sits flush with front doors and has overhang on back side for island back paneling return
Shaker
IEP33426TR IEP33438TR IEP33450TR IEP63426TR IEP63438TR IEP63450TR
• For the X-Panel, MD/MH not available • Finished on the back
IEP33426XP IEP33438XP IEP33450XP IEP63426XP IEP63438XP IEP63450XP
24 30 36 42 48
X-Panel
2 9/16
24 30 36 42 48
Panel Profile
Example shown using 38” Island Ends
2 9/16
23
36, 42, 48
Panel Profile
Transitional
2 9/16
23
36, 42, 48
Art, Box Hood Shaker.idw
Panel Profile
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
28½” 40½” 12” 50” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s s • • INS s s • • Art, Box Hood Transitional.idw
Premier–3–23
Made with FlippingBook Online document maker