VANITY POWER PULLOUT CABINET
21 VPPO12BH
• Pullout is wood • Contains three poly trays and a non-slip mat on fixed bottom shelf • Built in 15 amp UL listed duel outlets in the back • Round stainless-steel canisters for appliances and a square stainless-steel canister for cord storage in the top shelf • INSET: Not available
21
34 1/2
34 1/2
WIDTH
HEIGHT
DEPTH
12
Min. Max. 21” 30” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • • • • s • • • • • s • • Max. Min. Max. Min.
12
VANITY FILLER PULLOUTS
VFP3 VFP3BH VFP6 VFP6BH
• Includes wood spacers • Must be installed between two cabinets
19
• An overlay filler trim is recommended for FOL door styles • Can be installed next to a cabinet with Flush Cabinet End option by omitting supplied spacers • Natural finished wood with chrome rails • If not installed between 2 cabinets, exposed end must be covered with an end panel • Full extension slides • Finish techniques are not included
26, 30
2 Adj. shelves, 1 Fixed shelf
3, 6
FLUTED VANITY PILASTERS
PLAIN VANITY PILASTERS
31 1 / 2 ” High, 22” Deep
34 1 / 2 ” High, 22” Deep
31 1 / 2 ” High, 22” Deep
34 1 / 2 ” High, 22” Deep PP1.534V PP34V PP634V
FP34V FP634V
PP1.531V PP31V PP631V
FP31V FP631V
31 1 / 2 , 34 1 / 2
31 1 / 2 , 34 1 / 2
• ¾ ” Solid wood fronts • Back, top and bottom are ½ ” unfinished plywood • Sides are ½ ” finished plywood • When ID/RD option is chosen, pilasters are built to the specified depths (i.e. RD16 will be 16” deep) • For MDF door styles, pilasters are painted hardwood
• ¾ ” Solid wood fronts • Back, top and bottom are ½ ” unfinished plywood • Sides are ½ ” finished plywood • When ID/RD option is chosen, pilasters are built to the specified depths (i.e. RD16 will be 16” deep) • Finish techniques are not included • For MDF door styles, pilasters are painted hardwood
7 1 / 2
22
22
1 1 / 2 , 3, 6
3, 6
WIDTH
HEIGHT
DEPTH
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s s • s • INS s s • s •
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s s • s • INS s s • s •
ANGLE PLAIN VANITY PILASTERS
• ¾ ” Solid wood fronts • Back, top and bottom are ½ ” unfinished plywood
31 1 / 2 ” High, 21” Deep
34 1 / 2 ” High, 21” Deep APP34VL APP34VR
21
APP31VL APP31VR
18
21
• Finished on front and short side only • Short side available with FCE option • When ID/RD option is chosen, pilasters are built to the specified depths (i.e. RD16 will be 16” deep) • Finish techniques are not included • For MDF door styles, pilasters are painted hardwood • INSET: Not available
18
31 1 ⁄ 2 , 34 1 ⁄ 2
18
21
31 1 ⁄ 2 , 34 1 ⁄ 2
18
21
3
Top View
WIDTH
HEIGHT
DEPTH
3
Min.
Max.
Min.
Max.
Min.
Max.
3
Left Shown
Top View
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s • s •
3
MATCHING VANITY END PANELS
• ¾ ” Solid wood construction • Spacers on back to compensate for the face frame scribe • TOL door style have a decorative profile on sides • FOL has the matching door edge profile on the sides and are designed to flush with the face frame of the cabinet • Miter door styles have a mitered profile and separate toe kick • Slab door styles are slab with separate toe kick • For MDF door styles, Matching End Panels are painted MDF • INSET: Use IME option for installed end panel
34 1 / 2 ” High, 21” Deep 34 1 / 2 ” High, 18” Deep MVEPBH
31 1 / 2 ” High, 21” Deep
MVEP
31 1 / 2 ” High, 18” Deep
MVEP18
MVEP18BH
18, 21
Cope and Tenon One Piece
31 1 / 34 1 /
27, 30
2
2
3 / 4 " Solid Wood Finished (4) sides
WIDTH
HEIGHT
DEPTH
4 1 /
2
18, 21 Inset Design One Piece
Min. Max. 9” 30” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • • • INS • • • Max. Min. Max. Min.
Miter Miter/Slab Two Pieces
Premier– 6–20
Made with FlippingBook Online document maker