DESIGNER SUITES, FURNITURE — LARISSA
Design Details: 1. Decorative Crown Moulding Top Plate — Adds 5½” side to side and 2¾” depth to overall 2. Round Column and Split Spool — Adds ¾” depth to overall 3. Ogee Stack Moulding Bottom Plate — Adds 1½” side to side and 2¼” depth to overall 4. 2” Square Edge Fixed Shelf 5. Classic Leg & Foot
3
18
1
5
2
10
3 /
4
Recommended Door Styles:
3
4
2 4 1 /
2
| Notes for Vanities and Linen Cabinets Decorative Feet Option (DFO) and Integrated Matching End (IME) Modifications are not available. Modified Depth (MD) is limited to 18” and 24” except on the Linen cabinet where MD is available in 3” increments from 12”–24” * Depth and width shown are for cabinet boxes only. Mouldings, columns and base details will add to the overall cabinet width, depth and height. • Furniture Inset Standards
Overlay: Melrose
Inset: Hanover
Hinges — Concealed (CH) Frame — Non-Beaded (NB)
VANITY SINK CABINETS
1 Door, 1 Fixed shelf LAR-VS18 L/R LAR-VS24 L/R
• MD only available in 18” and 24” depth
21
34½
18, 24
• MD only available in 18” and 24” depth
21
LAR-VS30
2 Doors w/o center mullion, 1 Fixed shelf
34½
30
LAR-VS36 LAR-VS48
• MD only available in 18” and 24” depth
21
2 Doors, 1 Fixed shelf
34½
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min. 18”
Max.
24” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s • s s • INS s • s s •
36, 48
1 Door, 4 Drawers, 1 Fixed shelf LAR-VSDB57SB VANITY SINK DRAWER BASE SINGLE BOWL CABINET 21 24½
• MD only available in 18” and 24” depth • INSET: Will have 2 doors
34½
57
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min. 18”
Max.
24” Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL s • s s • INS s • s s •
Premier– 6 .2–8
Made with FlippingBook Online document maker