3.1 Manual Illumination and Lens Control
The focus position of the telecentric lens is controlled by a wire-controlled pendant. The pendant is connected to the I/O control panel on the right side of the system with a DB9 connector. The pendant includes functionality to control both speed and position of the lens. See the figure below.
Position lever
•
Speed control
•
Wire-Controlled Pendant
Control
Function Tasks
Speed selector
• Move the selector up (=) to set the speed to Fast. • Move the selector to the middle position (O) to set the speed to Normal. • Move the selector down (—) to set the speed to Slow. • Push the lever to the Up position to move the lens up in the vertical direction. • Push the lever to the Down position to move the lens down in the vertical direction.
Position Lever
The light levels are controlled through slides within the M3 software. Refer to the M3 software documentation for additional information.
14
Made with FlippingBook - professional solution for displaying marketing and sales documents online