AVR200 and AVR300 User Guide
Emergency stop switch
Figure 1. Joystick Emergency Stop Button
Figure 2. Emergency Stop Switch
• If the Emergency Stop is engaged while a program is running, all motion will cease, and a dialog box will display the following message: “The program has been interrupted [SIC] by a hardware error? A CNC E-Stop error occurred. An E-Stop Error occurred on axis 1. An E-Stop Error occurred on axis 2. An E- Stop Error occurred on axis 3. “ When the Emergency Stop is disengaged, nothing further will happen. The system should now resume normal function and the program will need to be re-run from the start. Any data collected before the Emergency stop was engaged will be saved and can be viewed/exported as normal. • If the user attempts to run the program with the Emergency Stop engaged, all motion will cease, and a dialog box will display the following message: “The program has been interrupted [SIC] by a hardware error? A CNC E-Stop error occurred. An E-Stop Error occurred on axis 1. An E-Stop Error occurred on axis 2. An E- Stop Error occurred on axis 3. “ When the Emergency Stop is disengaged, nothing further will happen. The system should now resume normal function.
10
6106 Revision D
Made with FlippingBook - professional solution for displaying marketing and sales documents online