AVR200 and AVR300 User Guide
4.3 Electrical Specifications
The following table provides the electrical specifications for the AVR systems.
Feature
Specification
Voltage requirement
120/240 VAC
Power requirement
300W peak, 200W typical
Power Supplies
“Brick” type AC adapters, 100/240 VAC, for metrology unit and PC
4.3.1 Electrical Power
AVR systems are powered by two “brick” type AC adapters. The following table provides the specifications of the AC adapters.
Feature
Specification
Metrology unit AC adapter
19.5 VDC output
System PC AC adapter
24 VDC output
Voltage requirement
100/240 VAC power for worldwide us
Maximum combined current draw 4.6A at 120 VAC 2.3A at 240 VAC
The adapters are normally placed on the floor. Before doing so, verify that the floor will never be flooded or hosed down for cleaning. If there is danger of contact with water on the floor, place the adapters in a higher, protected location.
Figure 13. AVR System Power Supplies
23
6106 Revision D
Made with FlippingBook - professional solution for displaying marketing and sales documents online