AVR200 and AVR300 User Guide
5.3 Uncrating the Equipment
Tool Requirements
The following items are required to uncrate and install an AVR system:
• Battery powered drill with Phillips bit (to remove top and sides of shipping crate)
• Crescent wrench (to remove screws which attach shipping tabs to the crate)
• Bubble level (to level workbench or workstation)
Common hand tools
•
Procedure
To uncrate the AVR system, refer to the following figure and perform the following steps:
1. Remove the screws on the top of the crate and carefully remove the top.
2. Remove one of the side panels for access to the contents.
3. Remove and unpack all components.
4. Verify that the contents match the packing checklist included in the documentation packet.
Figure 19. Removing Screws from the Shipping Container
32
6106 Revision D
Made with FlippingBook - professional solution for displaying marketing and sales documents online