AVR200 and AVR300 User Guide
System Operations
6.
This section provides information on the following operations for the AVR systems:
Powering on the system
•
Using the system controls
•
Verifying basic M3 software operations
•
Using parts fixturing
•
Accessing system electronics
•
6.1 Powering On the System
Power Switches
AVR systems have two power switches. Refer to the previous figures.
• On/Off rocker switch on the rear of the AVR system
• Power button on the front of the system PC
The pendant with the joystick and trackball is powered by the metrology unit. Turn the system off when not in use.
Caution
Before removing power, first close all computer files and applications, and then shut down the computer using the Windows “Shut down” function. Otherwise computer files could be corrupted by the sudden loss of power.
Procedure
To power on the system, perform the following steps:
1. Power on the AVR system by pressing the Power On/Off switch on the side of the unit to the “I” position. Refer to the following figure.
I/O Panel
Power Switch
Figure 26. AVR Power Switch
2. Power on the mouse by moving the switch on the bottom of the mouse to the On position.
39
6106 Revision D
Made with FlippingBook - professional solution for displaying marketing and sales documents online