AVR200 and AVR300 User Guide
3. Power on the keyboard by moving the switch on the top of the keyboard to the On position.
4. Power on the monitor.
5. Power on the system PC. Ensure that the system PC boots up properly.
6. Verify that the preinstalled M3 software is functioning properly. Refer to the “Verifying Basic M3 Software Operations” later in this section for additional information.
6.2 Manually Controlling the System
The AVR system can be manually controlled using the joystick. The following table provides the functionality of the joystick. Refer to the following figure for the location of the controls.
Control
Function
Emergency stop switch
Press to stop all CNC motion.
Button 1
Speed toggle. Located on the top of the joystick. Press once for slow speed for the control. Press again for normal speed. Axis lock. Press for motion along one axis only. Press again to allows diagonal motion. Z-Toggle. Press for Z-axis control by the trackball. Press again for Z- axis focus control or Q-Axis rotary stage control by the trackball. Go To Here. Press to lock in coordinates when programming. Enter. This button functions the same as the Enter key on a PC keyboard.
Button 2
Button 3
Button 4 Button 5
Joystick deflect right to left Joystick deflect front to back Joystick rotate
Moves the stage from right to left (X-axis control).
Moves the stage up or down (Y-axis control).
Moves the stage in and out (Z-axis focus control).
Trackball
Rotate for fine tuning X and Y positions, or for fine tuning Z-axis focus or Q-axis rotation as set by Button 3.
40
6106 Revision D
Made with FlippingBook - professional solution for displaying marketing and sales documents online