4.7.3 Getting Started Unpack the boxes which contain the metrology unit, 24” touch-screen video monitor, and Shuttle PC. Place the metrology unit and 24” touch-screen video monitor on the intended desktop or benchtop. Attach the Shuttle PC to the back of the 24” touch-screen monitor using supplied hand-screws. Note that you will be using the Shuttle PC’s USB connectors facing down. Connect the Shuttle PC to the 24” touch-screen monitor using a supplied USB cable and USB 3.0 ports (blue connectors). Connect the Shuttle PC to the camera of the metrology unit using a supplied USB cable and USB 3.0 ports (blue connectors). Connect the Shuttle PC to the MetLogix controller using a supplied USB cable. Verify that one of the USB ports of the Shuttle PC contains the transceiver for the wireless mouse and keyboard. Plug the metrology unit and Shuttle PC in an AC power outlet, and turn on both units. Launch MetLogix M3 software by clicking on the “Run M3” shortcut on the computer desktop, and a highly magnified image of an object placed on the base will appear on the monitor screen. Please refer to the supplied M3 software manual on the use and extensive capabilities of M3 software. Set focus by raising and lowering the optical head. The object to be viewed will be in best focus at a specific height. Use the two large inner knobs on the side of the Z-column for coarse height adjustment, then use the two smaller outer knobs for fine height adjustment. Set top and bottom illumination under computer control via sliders on the computer screen. Illumination settings can also be saved and be recalled under program control for more repeatable video edge detection. Features to be measured can be selected at the click of a mouse or by pressing directly on parts features shown on the computer screen. Please refer to the M3 software manual.
- 27 -
Made with FlippingBook - professional solution for displaying marketing and sales documents online