6. KineMic Options 6.1 Optional Boom Stand
The boom stand, P/N 3623, can be used with all KineMic models that do not use an X-Y stage. It allows the KineMic optical head to be used for inspection and field-of-view measurements of features of large parts which would not fit on the standard stand. It is normally ordered with new KineMic systems, since special provisions have to be made for electrical cabling. Key features of the stand are a heavy metal base measuring 26 x 36 x 2.5 cm (9 ¼” x 14 ¼” x 1”), a vertical post measuring 39 cm (15 ½”) above the base, a horizontal boom measuring 54 cm (21 ¼”) long, and an adjustable mount for the KineMic optical head. The mount provides knobs for 55 mm (2.2”) of height adjustment and is hinged vertically so that the optical head can swing out sideways. A separate clamp ring around the vertical post prevents the horizontal boom from dropping. At its maximum extension, the boom stand can provide a horizontal clearance of 65 cm (25 ½”) between the vertical post and the optical axis, compared to only 11.5 cm (4 ½”) for the standard KineMic mount. Additional clearance is provided by swinging out the optical head. 6.2 Auxiliary Lenses for Zoom Optics Two auxiliary lenses can be added to the KineMic 6.5:1 zoom optics: A 0.5X auxiliary lens, P/N 4828, cuts magnification in half but doubles the field of view. A 2.0X auxiliary lens, P/N 4829, doubles magnification but cuts the field of view in half.
- 33 -
Made with FlippingBook - professional solution for displaying marketing and sales documents online