parts under conditions different from those controlling the stated dimensional specifications for these parts. Before performing critical parts measurements, allow the system to warm up and temperature stabilize for 30 minutes. 1.6 Safety Considerations
General Safety
KineMic vision metrology systems are designed for safety and proper ergonomics during normal use. Exercise caution when lifting, handling or moving the systems to maintain calibration and measurement performance. Disconnect all power sources prior to moving or working on the equipment. Consult SKE if you have any question regarding transporting, using or maintaining the systems. KineMic vision metrology systems do not contain hazardous AC line voltages, as these are contained on the input side of the system’s AC adapters, which are UL listed. Even at these low voltages, there is the potential of electrical component damage caused by accidental short circuits. For maximum electrical safety and minimal risk to the equip- ment, follow the guidelines below: Ensure that the power receptacles for the AC adapters are properly grounded 3- prong polarized 120V AC types for use in North America or appropriate safety-rated receptacles for use outside of North America. Do not operate the systems with housings open except for service by a factory trained technician. Keep liquids away from the systems, and do not operate the equipment in excessively humid conditions, as water can cause short circuits. Keep metal filings away from the systems, as such debris can cause short circuits. Do not operate the equipment around volatile or flammable solvents, as local electrical heating could cause ignition. Disconnect power, or do not plug in the power cord, if hazardous conditions exist such as a damaged or frayed power cord, a damaged or improperly grounded power recep- tacle, equipment exposure to liquid spills or excessive moisture, or impact damage. Have the system inspected by authorized personnel before operating. There are no fuses or user-serviceable items in the systems. System should only be opened by a factory-trained service technician.
Electrical Safety
1.7 Disclaimer of Liabilities The L.S. Starrett Company shall have no liability or responsibility to the customer or any other person or entity with respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by this documentation, or the hardware and software described in it. This includes, but is not limited to, any interruption of service, loss of business or anticipatory profits, or consequential damages resulting from the use or operation of hardware or equipment. 1.8 Copyright & Trademark Information KineMic™ is a trademark of the L.S. Starrett Company. M3™ is a trademark of MetLogix, Inc. har ® is a registered trademark of Microsoft Corporation.
- 6 -
Made with FlippingBook - professional solution for displaying marketing and sales documents online