16
HD400 and HB400 Operator ’ s Manual
10 (HD)
5.2
Taking Measurements
1. Secure the component to the workstage with a suitable work holder.
2. Turn on the POWER switch.
3. Turn on the PROFILE lamp switch, then turn the focus control to produce a sharp image on the screen.
4. Refer to the manufacturers manual for setting up the DRO (and edge detector if fitted) and taking measurements.
Refer to 5.3 - Using the Digital Protractor for using the protractor.
Use the manual controls as required: Linear measurements
: X and Y axis handwheels
Angular measurement
: Angular adjustment control and digital protractor.
Surface features
: Surface illumination and light guides.
Made with FlippingBook - professional solution for displaying marketing and sales documents online