8
HD400 and HB400 Operator ’ s Manual
3.4
Removing Transit Straps (Figure 2)
The transit straps are painted red.
CAUTION:
The transit straps must be removed before any attempt is made to move the workstage or to use the projector.
Remove all transport straps (pictured below) fully before use
Fig.2
3.5
Fitting the DRO (Figure 3)
1. Fit the bracket to the projector, securing it with the four screws A.
2. Fit the DRO to the bracket, securing it with the two screws B.
3. Ensure all cables are connected in the appropriate connectors.
Projectors fitted with Edge detection:
4. Fit the reference cable and screen cable connectors to the corresponding sockets at the back of the DRO. 5. If an optional x50 or x100 projection lens is to be used, screw the diopter supplied on to the condenser lens assembly (on the face of the projection lamp cover nearest the screen, see Section 6 - Maintenance, Figure 7 , item 9 ).
Made with FlippingBook - professional solution for displaying marketing and sales documents online