2.2.1 EMC Standards
The following information provides the EMC standards for the HDV systems.
Standard
Description
EN 55011 Class A
Conducted Electromagnetic Emissions
EN 55011 Class A
Radiated Electromagnetic Emissions
EN 61000-4-2
Electrostatic Discharge (Contact)
EN 61000-4-2
Electrostatic Discharge (Air)
EN 61000-4-4
Electrical Fast Transients (Direct Coupled)
EN 61000-4-4
Electrical Fast Transients (Capacitive Coupled)
EN 61000-4-6
Radio Frequency Conducted Immunity (150 kHz-80 MHz)
EN 61000-4-5
Surge (for control computer, et al)
EN 61000-4-11
Voltage Dips, Short Interrupts and Voltage Variations Immunity
2.2.2 Safety Standards
The following information provides the safety standards for the HDV system.
Standard
Description
EN 292-1
Safety of Machinery, General Principles for Design (Referenced)
EN 60204
Safety of Machinery, Electrical Equipment of Machines
EN 12100
Safety of Machinery, Principles for Risk Assessment
2.3 Safety Considerations
General Safety
Starrett metrology systems are designed for safety and proper ergonomics during normal use. Exercise caution when lifting, handling, or moving the system to maintain equipment calibration and measurement performance. Consult Starrett if you have any questions regarding transporting, using, or maintaining this system. Follow standard safety protocols for electrical and mechanical equipment in addition to all guidelines outlined in this manual. Failure to exercise proper safety practices might result personal injury and equipment damage.
Made with FlippingBook - professional solution for displaying marketing and sales documents online