HE400 Operators Manual
6.7
Renewing the Surface Illumination
Surface illumination uses long life LED lighting. In the event of the LED lighting failing, please contact Projector Dealer or Starrett Technical Department.
6.8
Lubrication
Periodically lubricate the slides with light oil.
6.9
Latch Block Adjustment (Figure 9)
The tension of the latch block on the X-axis slide latch may require adjustment after a period of use. If necessary, re-set the tension as follows:
1.
Withdraw the end cap (the cap is a push fit).
2.
Unscrew and remove the engagement handle.
3. Insert an Allen key into the socket lock screw, release the screw, and hold the nut in position with the key.
4.
Rotate the bearing mount/collet to give the required tension.
5.
Tighten the socket lock screw.
6.
Refit the engagement handle and end cap.
Figure 9
Latch Block Adjustment
6.10 Calibration
Have the machine calibrated yearly for optical size and mechanical deviations. (Contact Starrett Technical Department or an authorised distributor for details of this service).
13
1000 0193 Rev C
Made with FlippingBook - professional solution for displaying marketing and sales documents online