8
7
7
Fig 14
6
6 Focus Hand wheel.
Moves the workstage along the Z-axis for focusing.
7 X & Y Axis Handwheel
For fine adjustment of the workstage along the X & Y-axis.
8 LED Surface Illumination.
Provide surface illumination for measuring surface features of flat components. For the optimum illumination, switch on surface illumination on front facia and adjust surface variable dial until best definition is observed. For components with a directional surface finish (such as ground faces), the surface texture should be vertical to give the brightest image on the screen.
5.2 Taking Measurements 1.
Secure the component to the workstage with a suitable work holder.
2.
Turn on the POWER switch.
3. Turn on the PROFILE lamp switch, and turn the focus control to produce a sharp image on the screen. 4. Refer to the QC manual for setting up the DRO (and edge detector if fitted) and taking measurements. Refer to 5.3 - Using the Digital Protractor for using the protractor. Use the manual controls as required: Linear measurements X- and Y-axis hand wheels. Angular measurement Angular adjustment control and digital protractor Surface features : Surface illumination.
Made with FlippingBook - professional solution for displaying marketing and sales documents online