3.5 Fitting the DRO (Figure 3)
1. Fit the bracket to the projector, securing it with the four screws ( Fig 3 ).
2. Fit the DRO to the bracket, securing it with the two screws B ( Fig 4 ).
Fig 3 Fig 4 3. Pull the cables individually through the slot in the bracket and fit the three labelled D- way connectors and the mains connector into the corresponding sockets at the back of the DRO.
Fig 5
Fig 6
Projectors fitted with edge detector 4. Fit the reference cable and screen cable connectors to the corresponding sockets at the back of the DRO.
3.6 Mains Connection
WARNING: A secure earth connection must be provided.
The cable colour code is as follows: Brown : Live Blue : Neutral Green/Yellow : Earth
The mains voltage is factory set to the correct value for the local supply. Please check that local supply is the same as voltage label on rear of Projector (Fig 7).
Fig 7
Made with FlippingBook - professional solution for displaying marketing and sales documents online