3.7 Commissioning Checks Make the following checks before putting the projector into service, referring to Section 5 - Operation as necessary: 1. Make sure that the projector is secure and level on its bench or stand. 2. Fit a work piece securely to the workstage. 3. Switch on the power supply. 4. If a digital protractor is fitted, check that the displays and indicators light up for approximately one second. 5. Check that the DRO screen shows a display. 6. Switch on the profile illumination, and turn the focus (Z-axis) hand wheel to bring the work piece into focus. Check that the screen image is satisfactory. 7. Switch on the surface illumination and check that light turns on. NOTE – Do not look directly at the Surface Illumination light source. 8. Release the latch block on the X-axis slide, check that the slide moves freely, and apply the latch. 9. Turn the X-axis and Y-axis hand wheels and check that the workstage moves freely.
Made with FlippingBook - professional solution for displaying marketing and sales documents online