systems. Follow standard safety protocols for electrical and mechanical equipment in addition to all guidelines outlined in this manual. Failure to exercise proper safety practices may result personal injury and equipment damage.
WARNING
Exceeding the maximum load capacity of 150 kilograms (330 pounds) significantly reduces accuracies of the system and might damage the mechanical structure.
Electrical Safety
HDV systems do not contain hazardous AC line voltages, as these are contained on the input side of the system’s AC adapters, which are UL listed. Even at these low voltages, there is the potential of electrical component damage caused by accidental short circuits. For maximum electrical safety and minimal risk to the equipment, adhere to the following guidelines: • Ensure that the power receptacles for the AC adapters are properly grounded 3-prong polarized 120V AC types for use in North America or appropriate safety-rated receptacles for use outside of North America.
• Do not operate the systems with housings open except for service by a factory trained technician.
• Disconnect all power sources prior to moving or working on the equipment.
• Keep liquids away from the systems, and do not operate the equipment in excessively humid conditions, as water can cause short circuits.
• Keep metal filings away from the systems, debris can cause short circuits.
• Do not operate the equipment around volatile or flammable solvents, as local electrical heating could cause ignition.
• Disconnect power, or do not plug in the power cord, if hazardous conditions exist such as a damaged or frayed power cord, a damaged or improperly grounded power receptacle, equipment exposure to liquid spills or excessive moisture, or impact damage. Have the system inspected by authorized personnel before operating. • Control unexpected hazardous energy by using the detachable IEC (International Electrotechnical Commission) plug lockout device available with the system. The lockout device works as a block to prevent power going to the socket by simply plugging into the socket and twisting. To install the lockout device, refer to “Installing the Lockout Device” in Section 6 of this document.
Mechanical Safety
The HDV system has moving components and pinch points. Do not place hands and mechanical items near pinch points. Failure to observe this warning could result in personal injury and equipment damage.
Made with FlippingBook - professional solution for displaying marketing and sales documents online