6.2.3 Adjusting the Keyboard
The articulated arm that holds the keyboard can be adjusted to best suit your working habits. By default, the keyboard is mounted to the left side of the contour illumination post, but a mounting location to the right side of the post can be specified at the time order. Refer to the following figure for information on the knobs and levers used to adjust the keyboard position.
Locking knob for 1 st swing-out arm
Locking knob for 2 nd swing-out arm
Ball joint for keyboard tilt angle
Locking lever for ball joint (on other side of ball joint)
Figure 20. Adjusting the Keyboard
6.3 Controlling Power to the System
HDV500 systems are equipped with three power switches. Refer to the following figures.
• A rocker switch on the back of the unit adjacent to the 115/ 230V power connector as required for CE certification. This switch supplies power to the two power switches on the front column of the system. Refer to the following figure.
Figure 21. Power Entry Module at Rear of the System
Made with FlippingBook - professional solution for displaying marketing and sales documents online