Once the machine is homed, the screen indicates the machine is homed and there is a green checkmark in the upper right corner of the screen. Touch or click on the screen.
For accurate measurement, this checkmark must be green before proceeding.
6.5 Installing the Lockout Device
An optional component available with the HDV system is a lockout device that is used to control unexpected hazardous energy. The lockout device works as a block to prevent power going to the socket. Note : To purchase the lockout device, refer to “Spare Parts and Accessories” later in this document.
To install the lockout device, refer to the following figure and perform the following steps:
1. Locate the power entry module at the rear of the system. Refer to Figure 23.
2. Install the lockout device onto the power connector.
3. Twist the “key” clockwise to set the device in place.
4. Attach the safety tag to the padlock and insert the padlock into the opening on the lockout device.
5. Remove the key and retain the key in a safe location.
Power entry module (rear of HDV system)
Padlock
Lockout Device
Safety Tag
Figure 23. Installing the Lockout Device
Made with FlippingBook - professional solution for displaying marketing and sales documents online