Installing a New Lens
To install a different lens, refer to the following figures and perform the following steps:
1. Locate the red dot on the lens and the red dot on the lens mount. These dots are used to properly align the lens.
2. Insert the new lens and ensure the red dots align.
3. Turn the lens clockwise until the lens locks into place.
4. Reposition the ring light around the lens. The ring light is attached magnetically with four magnets on the lens.
5. Reconnect the ring light by inserting the cable connector and tightening the black knurled nut that holds the electrical cable connector in place. The black cable connector is keyed so that the two connector pins can only be inserted in one orientation.
Red Dots Aligned
Figure 25. Aligning a New Telecentric Lens
Made with FlippingBook - professional solution for displaying marketing and sales documents online