2.1 Manual Controls via Pendant
Push button to toggle between slow and fast control. Applies to X-Y and Z axes.
Deflect joystick from left to right for X-axis control, from front to back for Y-axis control.
Rotate joystick for Z-axis height control.
Push button to toggle between trackball control of X-Y axes or Z axis.
Push button to toggle between axis lock, where only one axis can be moved at one time, and non-axis lock.
Rotate trackball for X-Y or Z fine control as selected by left pushbutton.
2.2 Emergency Stop (E-Stop) Switches M3 CNC systems come with two latching E-Stop switches as a safety feature. These are wired in series so that either one can remove power from the motors.
Press red button to cut power. Rotate button clockwise to release.
Press red button on back of pendant to cut power. Press again to reapply power. Button in = energized Button out = de-energized
2.3 Environmental Considerations Starrett Vision Metrology Systems are factory calibrated under the standard laboratory environ- mental conditions shown below:
Specification
Requirement
68°F ± 1°F (20 ° C ± 0.5°C)
Ambient Temperature
Humidity
40-60% RH
Temperature rate of change
1°F (0.5°C) per hour
- 13 -
Made with FlippingBook - professional solution for displaying marketing and sales documents online