4. Locate the two red tabs by referring to the following figure.
5. Using a metric hex wrench, remove the two M5 socket head cap screws that secure each tab. Refer to the following figure.
Shipping tabs
Figure 12. Rear Panel Shipping Tab Locations
Figure 13. Removing the Shipping Tabs
6. Close the hinged door and reattach the washers and M4 screws.
5.5 Setting Up the System
To set up the system, refer to the following figures and perform the following steps:
1. Locate the I/O panel on the rear of the MVR system. The rear panel includes a sticker so that cabling locations can be easily identified. Refer to the following figure.
2. Connect the power cable to the connector marked “24V” on the I/O panel. This cable provides input from the power supply.
3. Connect the remaining end of the power cable to an appropriate power outlet.
Made with FlippingBook - professional solution for displaying marketing and sales documents online