Figure 14. MVR I/O Panel
4. Connect the USB cable to the USB connector marked “M3” on the I/O panel of the MVR metrology unit and the remaining end of the cable to the USB connector on the rear panel of the system PC. This cable supports the encoder signals for the M3 software. Refer to the following figure. 5. Connect an additional USB cable to the USB connector marked “Camera” on the I/O panel on the MVR system and the remaining end of the cable to the rear panel of the system PC. This cable supports the camera signal.
HDMI cable connection for monitor
USB connectors for M3 and camera
Power supply connection
Figure 15. System PC Rear Panel
6. Connect the HDMI monitor cable to the HDMI port on the rear panel of the system PC.
7. Connect the power supply cable from the rear panel of the system PC to a power source.
8. On the front panel of the system PC, insert the dongle for the wireless keyboard and mouse. Refer to the following figure.
USB connector for wireless keyboard/mouse
Power On/Off Switch
Figure 16. System PC Front Panel
Made with FlippingBook - professional solution for displaying marketing and sales documents online