position.
4. Power on the keyboard by moving the switch on the top of the keyboard to the On position.
5. Power on the monitor.
6. Power on the system PC. Ensure that the system PC boots up properly.
6.2 Using the Systems Controls
The following table describes the operator controls for the MVR system. Refer to the following figures for the locations.
Control
Location
Function
Hand wheel with crank
Left side of system
X-axis motion
Toggle switch
Left side of system
Three-position switch for fine/coarse speed control of Z-axis travel. X-axis motion. Attached to same shaft as hand wheel on left side of machine. Proportional speed control switch for up-down Z-axis travel.
Knob
Right side of system
Speed control switch
Right side of system
Hand wheel with crank
Right side of system
Y-axis motion
Hand wheel with crank for X-axis motion
Three-position toggle switch for fine/coarse speed control of Z-axis travel.
Figure 18. Left Side System Controls
Made with FlippingBook - professional solution for displaying marketing and sales documents online