Knob for X-axis motion.
Hand wheel with crank for Y-axis motion
Speed control switch for Z-axis travel
Figure 19. Right Side System Controls
6.3 Verifying Basic M3 Software Operations The following information provides basic instructions for operating the M3 software. For detailed information, refer to the MetLogix M3 Video and FOV Inspection Software User’s Guide included with your system.
To start the M3 software, perform the following steps:
1. Double-click the M3 software icon on the desktop. Refer to the following figure.
This action displays the interface below.
2. Select Start or touch the Start button on the screen. You will need to move the hand cranks until the screen tells you that that axis is homed.
3. Once the machine is homed, the screen indicates the machine is homed and there is a green checkmark in the upper right corner of the screen. Touch or click on the screen.
For accurate measurement, this checkmark must be green before proceeding.
Made with FlippingBook - professional solution for displaying marketing and sales documents online