AVX System User Guide
• Easy to use operator controls including joystick, wireless keyboard and mouse, and 24-inch touch screen monitor. • Optional CNC rotary stage that provides increased radial load stability and moment load rating. • Optional touch probe, that is fully integrated into the M3 software. The touch probe is ideal to measure the height of flat surfaces or the lateral position of vertical surfaces at different heights. • Optional touch probe changing rack enhances the touch probe option by offering additional utility.
3.3 AVX System Components
The following information describes the key components of the AVX system. Refer to the following figure for the locations of these components.
Ergonomic workstation with monitor, keyboard, and mouse
Z column for X-Z axis travel
Dual camera configuration (zoom and telecentric)
Touch probe option
Stage with Y-axis travel
Granite base
Figure 1. AVX System Components
3.3.1 X-Y-Z Stage
The AVX system is designed using a split gantry stage methodology. The stage sits upon a granite base plate with Y axis travel using a mechanical linear bearing. The Z column is fixed to the bridge and provides X and Z axis travel. Motion along the Z-axis is by means of a quiet-running DC servo motor. The system provides a large X-Y-Z stage of travel of 550 x 400 x 250 millimeters (22 x 16 x 10 inches). The stage is made from precision machined aluminum with surface mounting holes that enable customer-designed fixtures for part support.
10
1000 0074 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online