AVX System User Guide
Hex wrench
•
Phillips and flat head screwdrivers
•
Industrial level
•
To uncrate and move the AVX system, refer to the following figures and perform the following steps: 1. Locate the front side of the crate. A label is adhered to the front panel indicating the front side. 2. Locate the red dots on the front panel. These dots mark the screws the secure the front panel to the crate. 3. Use a reversing battery powered drill with a Phillips bit, remove the screws marked with red dots that secure the front panel of the crate.
Red Dots that Mark Screws c
Figure 13. AVX Crate Front Panel
Once the crate is open, you will see four beams that secure the system to the crate. Two beams that go across the crate and two beams that are resting on the granite base. These beams are secured with screws on the right and left crate panels. Refer to the following figures.
28
1000 0074 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online