AVX System User Guide
Operating the AVX System
6.
This section provides information on the following operations for the AVX systems:
Powering on the system
•
Powering off the system
•
Using the system controls
•
Verifying basic M3 software operations
•
Changing the lens
•
Using parts fixturing
•
Replacing the fuse
•
6.1 Powering On the System
To power on the AVX system, refer to the following figure and perform the following steps:
1. Ensure all cable connections are correct and complete. Refer to “Setting Up the System” earlier in this document for more information. 2. From the I/O panel on the rear of the system, push the Power switch to the position marked “|” (On). Refer to the following figure.
Power Switch
Figure 26. Rear Power Switch
3. Locate the control panel on the bottom front of the AVX system. Refer to the following figure.
37
1000 0074 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online