AVX System User Guide
6.5 Fixturing Parts Parts must be fixtured securely to prevent part movement during measurement. Options are available from SKE for off-the-shelf, semi-custom, or custom fixturing. Contract your SKE sales representative or Technical Services department for additional information. In addition, proper alignment of the part to the stage can aid in measurement. If the part is off - axis from the stage, X-Y-Z measurements will not correlate as well with the part dimensions. Aligning the part with the X, Y and Z axes of the system will improve dimensional measurements. Orientation errors, or skew errors, can also be removed by creating a reference frame based on the part before taking measurements. Refer to the MetLogix M3 Video and FOV Inspection Software User’s Guide for details. The following figure provides the location of the tooling holes on the system. Use these locations to customize the system to your operating requirements.
Figure 29. Tooling Holes
41
1000 0074 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online