AVX550 System User Guide
About This Guide
1.
1.1 Purpose This guide provides instructions on how to install, operate, and maintain the AVX CNC vision system. This guide also provides information on the various options and features available with the system. 1.2 Scope This guide provides detailed information components, features, and specifications of the AVX system. This manual also includes operating and maintenance information for the system. High-level information is provided on unpacking and installation. AVX systems are intended to be installed by SKE Technical Service specialists or qualified third-party personnel.
1.3 Audience
This guide is intended for end-user customers, SKE Technical Services specialists, and authorized SKE technicians.
1.4 Prerequisites
You should have some knowledge of metrology systems and be familiar with customary system administration and field service practices.
1.5 Conventions
This guide uses the following three conventions to present information that requires special attention: a warning, a caution, or a note.
A warning looks like this:
WARNING
Warning information is printed in a box. Warnings direct your attention to operating or maintenance procedures or practices that must be followed correctly to prevent personal injury, loss of life and, possible, hardware or software damage.
A caution looks like this:
Caution
Caution information is printed in a box. Cautions provide information that helps to prevent accidental hardware or software damage.
A note looks like this:
Note : Pay special attention to the information printed in italics that follows the Note: heading. Notes provide additional information that is important to the surrounding text.
5
Review Copy Only—Not for Distribution
1000 0074 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online