VB300 OPERATORS MANUAL
13
5 Metric/Inch toggle key 6 RS232 serial port data output key
7 X-axis value display 8 Y-axis value display 9 X-axis Zero key 10 Y-axis Zero key
Incremental/Absolute angle toggle key Absolute coordinates: origin at 0. Incremental coordinates: origin at absolute coordinates but, can be zero at any time. Mode toggle key. Press and hold for 3 seconds to switch between degrees and minutes and decimal degrees. Normally, the displayed angle will increase 90 degrees by pressing this key each time. The maximum value is 360 degrees. This LED readout has RS232 serial port transmission function, and it can be used in two ways. The first: external equipment can send the hexadecimal data to this LED readout through RS232 serial port, after receiving this signal, the LED readout will transmit and send displayed data through this serial port. The second: press the “SEND” key on the operating panel, the LED readout will send data through RS232 serial port. The RS232 serial port’s input/output specifications are as follows: Baud: 9600 Stop bit: 1 bit Data bits: 8 bits Start bit: 1 bit Parity bit: none Output data is provided in ASCII format as follows: PXxxxxxxxxYxxxxxxxxZxxxxxxCR Of which: PXY is identifier, x is symbol and data, and CR is terminator.
Refer to 5.3 - Using the Digital Protractor for using the protractor.
Use the manual controls as required: Linear measurements
X- and Y-axis hand wheels
Angular measurement
Angular adjustment control and digital protractor
Surface features
Surface illumination
Made with FlippingBook - professional solution for displaying marketing and sales documents online