VB300 OPERATORS MANUAL
7
3 Installation
3.1 Selecting Location The projector is designed for use in a normal workshop environment, but should be sited as far away as possible from sources of grinding grit, oil mist and vibration. Choose a convenient location with a firm, level floor, where the screen will not be subject to glare from sunlight or artificial lighting. Make sure that a suitable mains supply is available, (see below). The projector should be mounted on a bench, or on the optional stand supplied, so that the controls will be easily accessible. Note: The bench must be firm, flat and level. The projector mounting feet are factory set on a flat, level surface, and adjustment is not recommended.
3.2 Power Supply
A main supply of the correct voltage is required.
WARNING: Check the main voltage setting before connecting the main supply (see 3.5 - Mains connection).
3.3 Moving the Projector into Position (Figure 1) Pull out the lifting bars from the base and lift the projector using suitable equipment. The weight of the unit is approximately 123kg. CAUTION: Do not attempt to lift the unit by the screen housing.
Fig. 1
3.4 Removing Transit Straps and Screws
The transit straps are red.
CAUTION: The transit strap and screw must be removed before any attempt is made to move the workstage or to use the projector.
Fig. 2
Made with FlippingBook - professional solution for displaying marketing and sales documents online