8
VB300 OPERATORS MANUAL
3.5 Mains Connection WARNING: A secure earth connection must be provided.
The cable color code is as follows: Brown: Live Blue: Neutral Green/Yellow: Earth
The main voltage is factory set to the correct value for the local supply. Please check that local supply is the same as voltage label on rear of Projector (Fig 3).
Fig. 3
3.6 Commissioning Checks Make the following checks before putting the projector into service, referring to Section 5 - Operation as necessary:
1. Make sure that the projector is secure and level on its bench or stand.
2. Fit a work piece securely to the workstage.
3. Switch on the power supply.
4. Check that the LED readout is working.
5. Switch on the profile illumination, and turn the focus (Z-axis) hand wheel to bring the work piece into focus. Check that the screen image is satisfactory.
6. Switch on the surface illumination and check that light turns on.
NOTE – Do not look directly at the Surface Illumination light source.
7. Release the latch block on the X-axis slide, check that the slide moves freely, and apply the latch.
8. Turn the X-axis and Y-axis hand wheels and check that the workstage moves freely.
Made with FlippingBook - professional solution for displaying marketing and sales documents online