WARRANTY | WARNINGS
MODELS AT A GLANCE
EVEN A HELMET AS GOOD AS AN ARAI WON’T LAST FOREVER Like most major helmet manufacturers, Arai subscribes to the Snell Memorial Foundation benchmark of five years as the suggested usable lifespan of a motorcycle helmet. Why? Think of a helmet in terms of your body. No matter how good it may look, or how well you take care of it, age still takes its toll. Even with minimal use, a helmet is affected by things like the acids and oils in sweat, haircare products, cleaners, polishes, pollution, exposure to UV rays, etc. At about the five-year mark, helmet interiors begin to show wear and/or deterioration, which should serve as an alert to its overall condition. The helmet’s fit may begin to feel a little “loose,” not as snug as it once did. This, as well as unseen aging and deterioration of the EPS liner and fiberglass shell can affect the helmet’s ability to perform as it was originally designed in an impact. If a helmet suffers an impact and any doubt exists as to its further ability to protect, it should either be returned to the manufacturer for competent inspection or discarded and replaced. These are the reasons to replace your helmet after five years. Of course, if your helmet becomes less than snug in fit, or damaged, it should be replaced before the five-year mark.
ARAI’S 5-YEAR WARRANTY All Arai helmets are warranted against defects in material and workmanship, and as serviceable only for the properly fitted first user for 5 years after purchase, but no more than 7 years from the date of manufacture. Based on the recommendations of the Snell Memorial Foundation www.smf.org it should be replaced within 5 years of first use. Throughout the years, Arai has recorded the manufacture date on helmets in a standard month/year format (00/00). While the manufacture date has always been recorded on the chinstrap, as it is a permanent part of the helmet, the position on the chinstrap has changed over the years for various reasons. Most recently, the date-of- manufacture can be found etched on the metal D-ring on the chin strap.
FEATURES AND BENEFITS
STANDARD
OPTIONAL
PB-SNC 2 Shell | The Peripherally Belted Structural Net Composite shell is created from Super Fiber and special synthetic fibers assembled by Arai experts, and provides superb tensile strength and flexibility and also features Arai’s newly developed resins resulting in even more strength with less weight. PB-ScLc 2 Shell | The new Peripherally Belted Super Complex Laminate Construction shell combines multiple materials and techniques created internally by Arai over more than 6 decades of experience that deliver both performance and affordability. PB-cLc Shell | The Peripherally Belted Complex Laminate Construction reinforces Arai’s cLc shell for more strength and weight reduction adding more to Arai’s accumulation of incremental improvements over decades of experience to pursue gains in protection. PB-cLc 1 Shell | The Peripherally Belted Complex Laminate Construction shell features a newly developed AR MAT which allows the Regent-X to achieve a lower cost without compromising weight or protection performance. PB-cLc 2 Shell | The Peripherally Belted Complex Laminate Construction with latest generation Z resin and AR Mat is the accumulation of years of Arai’s experience in shell making, handmade with over 25 individual pieces bound by Arai’s new proprietary resin and reinforced by the Peripheral Belt. DF-X2 | The new Arai Spoiler DF-X2 for the Corsair-X. The Spoiler DF-X2 was designed and developed in the ultra-competitive environment of MotoGP and is designed to provide increased stability and aerodynamic efficiency for the rider. VAS Shield Mechanism | The Variable Axis System (VAS) incorporates a moving pivot point allowing for a lower shield mount position. A dual-function lever releases the cover plate and shield pin for quick shield removal. VAS Shield Demist Latch | This innovative latch captures and securely holds the shield closed to help resist unexpected opening. The demist function allows the shield to be opened just a bit while still fastened and is larger to allow for intuitive and seamless shield operation.
DATE OF MANUFACTURE LASER ENGRAVED ON METAL D-RING BUCKLE
WARNING: IF IT SOUNDS TOO GOOD TO BE TRUE, IT PROBABLY IS!
VAS Max Vision BV Shield | This shield features brow vents and a cavity to receive the Pinlock lens insert and provides better visibility for all types of riding.
Pinlock Lens Insert | This clear fog mitigating lens insert is made of a special material by Pinlock to absorb moisture and enhance visibility in all conditions.
Pro Shade System | This shield system offers a convenient external shade to block ambient light, while functioning as an aerodynamic peak in the raised position.
Arai produces to order, through established wholesale distributors only, who then sell through established retail dealers from stock. Therefore, we encourage everyone to be alert and use common sense when purchasing an Arai. WARNING | BUYING AN ARAI HELMET ONLINE Online shoppers take care to be sure they are dealing with an authorized Arai e-commerce retailer. These dealers have agreed to follow guidelines to help customers make the best purchase possible — even long distance. To find an authorized Arai dealer, visit araiamericas.com. WARNING | BUYING FROM OTHER COUNTRIES Each world market requires different helmet standards. Never purchase helmets from outside your market as they may not comply with legally required standards for your country, not to mention the fact that their interior fit may not have been designed for your market and as a result may be very uncomfortable. Helmets purchased from outside a given market are not eligible for after-sales service or warranty claims. Arai and its authorized agents cannot endorse the continued use of a non-certified helmet.
DF-X2 KNOCK-OFFS Don’t be fooled by Arai DF-X2 Knock-offs. If your priority is protection, only use Genuine Arai accessories. Only buy this item from an Authorized Arai dealer that can be found on our Dealer Locator on our website, araiamericas. com, or from our website. All Arai add-on accessories are made with plastic, designed to be both lightweight and frangible so they crush, break or come off under impact so as not to catch on an obstacle or the ground during an impact, which may send energy into the helmet or create excessive rotational force. Crushing, breaking or coming off allows the helmets to slide past or “glance off” some of that energy, minimizing how much gets into the helmet.
ES Chin Curtain | This curtain accentuates the egg-shaped form of the shell and blocks turbulent air from entering the underside; works with pull-down spoiler.
Pull Down Spoiler | Helps to minimize wind noise and turbulence, this movable piece under the chin also aids with the extraction of hot air from the rider’s face.
FCS ® Cheek Pad Design | Arai’s patented Facial Contour System adds just the right amount of support by moving out of the way when putting the helmet on, but once the helmet is on, cradling the rider’s face and jaw area.
5mm Peel-Off Layer | This removable layer gives the rider a micro-fitting option to easily adjust the cheek pads to one size thinner cheek pads.
Emergency Release Cheek Pads | These allow for easier access to an injured rider by sliding out via integrated pull tabs built into the cheek pad underside.
Common sense suggests that you can’t buy a brand new, real Arai for $200 or less. So, if you see an advertisement that appears to defy logic, walk away and hold onto your money. We don’t have eyes on the entire internet, but we’ve heard stories and even found a few examples of unscrupulous websites offering Arai helmets at ridiculously low prices. Most of these sites use real Arai images, without license or permission, to lure you in. Some then switch to an image of the real helmet you’re buying hoping that you won’t notice. Check out the above photos of a real Arai next to a fake sold online. Additionally, we have heard of other sites that look legitimate and show dozens of real Arai images, offering crazy low prices – but for that price you have to wait for a special bulk purchase direct from Arai. They take your money and tell you to wait. Eventually, after months, you get tired of waiting and press for information at which time you are told that Arai wouldn’t make the deal. It is then up to you to get your pre-payment back.
Removable Neck Roll Pad | This removable pad allows easier cleaning and replaceability along the rider’s neck for sound insulation and comfort.
Odor Resistant Interior Lining | Exclusive liner with odor resistant material stays fresher between cleanings.
Dry Cool Interior Lining | For all day comfort this moisture wicking material keeps you cool and minimizes the buildup of sweat.
Brushed Nylon Interior Lining | Very comfortable soft material provides all day comfort for those long rides.
Outward-Flaring Hyper-Ridge | Flares out to provide a larger opening for easier ingress and egress; the reinforcement band circles the bottom of the shell adding strength and lowering the helmet’s center of gravity.
Hyper-Ridge | The reinforcement band circles the bottom of the shell adding strength and lowering the helmet’s center of gravity.
Brow Vents | Gives you more cooling air in the temple and forehead area without holes in the critical forehead section of the shell or impact absorbing liner.
Cowl Exhaust Vent | Exhausts heat more efficiently; these vents are sculpted into the rear shell shape for optimal aerodynamic characteristics.
Diffuser Type 12 | These newly developed air diffusing top vent covers are 20mm longer than the previous design to improve stability and airflow.
QVF Series Top Vents | The three-position front intake duct provides optimal cooling and aerodynamics.
QVR Series Top Vents | This rear exhaust duct features a three-position sliding lever and stabilizing aerodynamics for a smoother ride.
Chin Vent Shutter | This closable gate in front of the center vent allows the rider to block out extreme weather conditions. Can be opened in warmer weather.
Removable Peak | This adjustable sun-blocking piece shields your eyes from glare.
All Arai motorcycle helmets meet or exceed Snell standards in addition to mandated DOT standards. For further information on the Snell standard, check smf.org.
50 |
www.araiamericas.com | 51
Made with FlippingBook - professional solution for displaying marketing and sales documents online