Specialist Marine Protection
n
1207
Wheelmarked Products
Ockwells are leading suppliers of quality flame retardant temporary protection materials with over twenty years experience in the building and maritime industries.
We work closely with our clients to meet their rigorous demands for protection materials used in dry-docking, newbuild, re-fit and on-the-run repair works.
We have made significant investments in Wheelmarked, Warrington Certifier (TS63) BRE (LPS1207) and Lloyds Register accreditations on our flame retardant products to give you peace of mind when specifying and using our products. We are also members of the British Marine Federation.
n
1207
Wheelmarked Products
See individual products for relevant certification
We provide temporary marine protection materials for all types of interior and exterior finishes including decking, carpeted and hard floor areas, walls, doors and hatches, furniture and fittings. Damage to high specification finishes are costly to repair or replace and this can lead to contract delays.
All our branches carry extensive stocks of Temporary Marine Protection products, experienced personnel are on hand to offer technical assistance and advice where required.
Ockwells Marine provides temporary protection solutions in the UK, Europe and Worldwide. The product range is continually expanding, for the latest product updates and information please visit our website at www.ockwellsmarine.co.uk.
Email: sales@ockwellsmarine.com www.ockwellsmarine.com
For expert advice on Marine Protection Materials, Contact Nigel Chubb on 01635 876336
Cards accepted
Maestro
DELTA
JCBCARDS JCB
Electron
2
Floor and Deck Protection
Self Adhesive Flame Retardant Carpet Protection Film
In this section there are a range of marine and offshore protection materials for use on floors and decks. See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages. • Carpet Protection Film Flame Retardant Has an anti slip embossed surface and is certified to 1121/11 164.112/1121/ WCL/MED0330.
n
Certified to TS63 approved product CF 747
• Hard Surface Protection Film Flame Retardant
Can be used on floors and other hard surfaces and is certified to 1121/11 164.112/1121/WCL/MED0329.
n
Certified to TS63 approved product CF 748
Developed to protect carpets during any new build, dry dock refit and on the run maintenance projects. • Manufactured from heavy duty embossed (anti-slip) flame retardant polythene film with a special Flame Retardant low tack adhesive back. • Ideal protection for cabins, stairways, corridors and open plan areas. • Carpets should be dry, clean and free from dust, dirt and excessive loose fibres before application. • New carpet should be ventilated for at least 24 hours. • Protect nosings/carpet plates with Ockwells Easi-peel (easy tear) tape before covering over with carpet film. • Dispensers are available for applying to large areas.
• TwinShield Flame Retardant
Can be used on floors and other hard surfaces and is certified to LPS 1207. Made from polypropylene which is recyclable.
1207
• Megafilm Flame Retardant
A slip resistant film available in grades to suit heavy duty site conditions through to dust, debris and liquid spills. Certified to LPS 1207.
1207
n
• FloorShield Flame Retardant (FR)
Currently the only flame retardant breathable material on the market in this price range. Certified to LPS 1207.
1121/11 164.112/1121/ WCL/MED0330
APPROVED PRODUCT CF 747
1207
Description FR Carpet Film FR Carpet Film
Dimensions
600mm x 100m
All the products in this section are Flame Retardant and Water Resistant
800mm x 100m FR Carpet Film 1200mm x 100m Dispenser 600mm or 800 - 1200mm universal
3
Self Adhesive Flame Retardant Hard Surface Protection Film Ockwells Flame Retardant Hard Surface Protection Film has been developed to protect hard floors in areas under construction and refurbishment. This protection is manufactured from flame retardant polythene film with a special low tack adhesive back that is designed to protect hard surfaces on a temporary basis without leaving a residue. • Hard Surface protection film for hard surfaces only. • Do not apply to wet or damp areas. • Before film application, floors should be clean and free from dust, dirt and loose debris. • Hard Surface Protection Film should be replaced every 4 weeks when used on floors, every 24 weeks on internal glass and every 12 weeks on external glass. • Cover entire surface, do not use as a runner. • Protect nosings or door plates with Ockwells Easi-peel (easy tear) tape before covering over with film.
n
1121/11 164.112/1121/ WCL/MED0329
APPROVED PRODUCT CF 748
Description
Dimensions
FR Hard Surface Film
600mm x 100m
Dispenser
600mm
4
TwinShield Protection Board Manufactured from translucent twin wall polypropylene board that is tough, durable, impact and chemical resistant, non-toxic and waterproof. TwinShield does not stain and is suitable for all round protection of decking, walls, bulkheads and doors. • LPS 1207 Flame Retardant • TwinShield meets the very stringent quality control standards of the LPCB • The LPCB logo and registration number are printed on every sheet of the product • Simply and quickly cut, curved or creased, lightweight and easy to position. • Custom print with your logo etc. subject to quantity.
1207
Description 2mm Sheets 3mm Sheets 4mm Sheets 5mm Sheets
Dimensions (mm)
2400 x 1200 2400 x 1200 2400 x 1200 2400 x 1200
5
Megafilm Protection Megafilm temporary protection materials are suitable for use on various floor finishes with a light grade suitable as a covering material protecting from dust or spillages on seating and furniture during routine maintenance. • Flame Retardant grades are manufactured and certified under the Loss Prevention Certification Board (LPCB) approve scheme
• Megafilm products are backed by technical support. For details on specific uses please see our website.
1207
Description Dimensions Light duty (white) 1.5 x 100m (150m 2 ) Marine Grade (Blue) 1.0 x 100m (100m 2 ) Marine Grade (Blue) 1.5 x 100m (150m 2 )
6
FloorShield Flame Retardant (FR) A breathable temporary floor protection material manufactured from flame retardant spun-bonded polypropylene.
• Fully accredited to LPS 1207 • Complies with fire regulations associated with temporary protection materials • Uses include temporary internal protection.
1207
Description FloorShield FR
Dimensions 1m x 100m
7
Overshoes - Standard
Overshoe Dispensers
Overshoes - Heavy Duty
Disposable Overshoes with Automatic Dispenser
The automatic dispenser is precision engineered to provide durability and reliability to dispense overshoes up to size 14 on shoes and up to size 12 on site Rigger boots. Easy to use and reload with overshoes. • Light, durable, non-staining and biodegradable • Textured to provide grip and prevent slipping even on polished surfaces such as vinyl & marble • Tested for slip resistance on all surfaces associated with the hospital environment • Dispenser comes with a free carry case, 100 overshoes and a one year guarantee. Additional overshoes come in packs of 100 or 2000 • Full set of instructions for reloading overshoes available. Pack Quantity Each refill box contains 100 (PVC) shoes (50 pairs)
Standard overshoes are made from durable polythene, Heavy Duty overshoes are made from Tyvek, both can be worn over shoes and work boots to protect carpets, laminate/vinyl flooring and most other finished surfaces. • One generous size fits all • Cost effective protection for finished surfaces. N.B. Not suitable for use with automatic overshoe dispenser.
Dimensions
Pack Quantity 50 pairs per pack 50 pairs per pack
Standard Overshoes (PVC) Heavy Duty Overshoes (Tyvek)
8
Door Protection
Flame Retardant Hard Surface Protection Film
In this section there are a range of marine and offshore protection materials for use on both internal and external doors. See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages.
• Hard Surface Protection Film Flame Retardant
Can be used on floors and other hard surfaces and is certified to 1121/11 164.112/1121/WCL/MED0329.
n
Certified to TS63 approved product CF 748
• TwinShield Flame Retardant
Can be used on doors and other hard surfaces and is certified to
LPS 1207. Made from polypropylene which is recyclable.
1207
• Flame Retardant Door Sleeves Polythene door sleeves certified to LPS 1207.
Ockwells Flame Retardant Hard Surface Protection Film has been developed to protect doors in areas under construction and refurbishment. This protection is manufactured from flame retardant polythene film with a special low tack adhesive back that is designed to protect hard surfaces on a temporary basis without leaving a residue. • Do not apply to wet or damp areas. • Before film application, floors should be clean and free from dust, dirt and loose debris. • Hard Surface Protection Film should be replaced every 4 weeks when used on floors, every 24 weeks on internal glass and every 12 weeks on external glass.
1207
• Flame Retardant Foam Protection Foam door frame protection flame retardant.
n
Certified to TS63 approved product CF5032.
All the products in this section are Flame Retardant and Water Resistant
n
1121/11 164.112/1121/ WCL/MED0329
APPROVED PRODUCT CF 748
Description
Dimensions
FR Hard Surface Film
600mm x 100m
9
TwinShield Door Protection
Flame Retardant Door Sleeves
Manufactured from translucent twin wall polypropylene board that is tough, durable, impact and chemical resistant, non-toxic and waterproof. TwinShield does not stain and is suitable for the protection of doors. • LPS 1207 Flame Retardant • TwinShield meets the very stringent quality control standards of the LPCB • The LPCB logo and registration number are printed on every sheet of the product • Available in door sized sheets and larger sheets which are simply and quickly cut, curved or creased, lightweight and easy to position.
Manufactured from fully accredited LPS 1207 polythene, Flame Retardant Door Sleeves allow all types of doors, single, double, standard and fire doors to remain in operation whilst preventing cosmetic damage. • Flame Retardant and Standard polythene available • Manufactured in a universal size that allows the sleeve to be fitted to most metric and imperial doors with ease • Surplus film can be folded over the top of the door and should be secured with flame retardant tape to ensure a snug fit • Where impact resistance is needed, door sleeves can be used in conjunction with standard or flame retardant door size TwinShield sheets.
1207
Description
Dimensions (mm)
2mm Door Sheets
2000 x 1000 2400 x 1200 2400 x 1200 2400 x 1200 2400 x 1200
1207
2mm Sheets 3mm Sheets 4mm Sheets 5mm Sheets
Description Dimensions Pack Quantity Flame Retardant 2200mm x 1100mm - 30 per roll Standard 2200mm x 914mm - 20 per roll
10
Flame Retardant Foam Protection for Door Frames Pillars and Handrails
Flame Retardant Foam Protectors can be used on internal or external doorframes in highly trafficked areas as well as Pillars and Handrails to ensure that expensive finishes are not unnecessarily damaged. • Manufactured from highly visible orange foam flame retardant and certified TS63 • Offer full cover protection with a high level of impact resistance • Minimises the need for costly and unsightly repairs • Circular foam is supplied pre-scored to be easily opened up and wrapped around frames up to 265mm wide • Combinations of foam and TwinShield protection board can be used to protect doors/frames on one or both sides.
n
APPROVED PRODUCT CF5032
Dimensions
Pack Quantity
Circular 114mm x 2m FR Circular 78mm x 2m FR Circular 48mm x 2m FR
11 per box 21 per box 35 per box
11
Dust/Dirt Protection
Flame Retardant Polythene Protection
In this section there are a range of marine and offshore protection materials for use on both internally and externally applications. See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages.
• Flame Retardant Polythene
Can be used to cover all surfaces and is certified to LPS 1207. Flame Retardant
1207
• Flame Retardant Bubblewrap
Can be used to cover all surfaces and is certified to LPS 1207. Flame Retardant.
1207
• Tack Mat
Can be used at entrances to doors to protect against excessive dust/dirt transfer.
• Rib-Mat Rubber Matting
Ideal in work areas to protect against damage to floors and surfaces.
Ockwells Flame Retardant Polythenes are manufactured to LPS 1207 and are a fully accredited product. Uses include covering fixed deck furniture and bridge equipment and are a cost effective solution to flame retardant temporary screen walling. • Supplied in 2 thicknesses on a roll. • Can be used to cover objects. • Can be used as screen walling to prevent dust travel. • Use Zip Doors and OckProps to create walling.
1207
Description Dimensions FR Polythene Standard Duty (white) 4m x 50m FR Polythene Medium Duty (white) 4m x 50m FR Polythene Heavy Duty (white) 4m x 25m
12
Flame Retardant Bubblewrap
Tack Mat
Free standing multi-layered floor mats 36 layers. • Each layer is coated with a non-transferable resin, when placed at the entrance to sensitive areas they compel pedestrian traffic to step-on and step-off the mat • The physical pressure of standing on the mat ensures that any loose particles on the soles of the shoe are detached and remain in the resin • Saturated layers can be simply peeled away to reveal a new clean layer
Description
Dimensions
Heavy Duty - Small Heavy Duty - Medium Heavy Duty - Large
610mm x 910mm 1010mm x 910mm 1520mm x 910mm
Rib-Mat Rubber Matting
Bubblewrap is a general purpose bubble protection providing cover and impact protection for both domestic and commercial uses. • Flame Retardant – accredited with the LPCB’s standard LPS 1207 • Ideal for Kitchen and Sanitary ware and covering stainless steel stair parts • Suitable for use with Easi-peel, easy tear tape on finished surfaces
• Manufactured from hard wearing natural rubber • Slip resistant ‘fluted’ surface • Ideal for work areas to prevent damage to surfaces. Description
Description Dimensions Bubblewrap - FR (10mm bubble) 1200mm x 100m Bubblewrap - FR (10mm bubble) 1500mm x 100m 1207
Dimensions
Rib-Mat
3mm x 0.9m x 10m
13
Stair Protection
Stairtread Protector
In this section there are a range of marine and offshore protection materials for use on both internal and external stairs. See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages.
• Stairtread Protector Self extinguising PVC.
• Flame Retardant Carpet Protection Film Has an anti slip embossed surface and is certified to 1121/11 164.112/1121/ WCL/MED0330.
n
Certified to TS63 approved product CF 747
• Flame Retardant MegaFilm
Flame Retardant MegaFilm which is certified to LPS 1207 for use on floors and stairs with a high degree of slip resistance.
1207
• Flame Retardant Foam Protection Foam Handrail and Newel post protection manufactured from flame retardant foam.
A rigid protective cover ideal for both commercial and domestic installations. • High visibility yellow colour
n
Certified to TS63 approved product CF5032.
• Self extinguishing PVC • Quick and easy to install • Unique anti-slip design • Impact and scuff resistant.
• Flame Retardant Edgeguards
Foam Handrail and Newel post protection manufactured from flame retardant foam.
1207
All the products in this section are Flame Retardant and Water Resistant
Dimensions Pack Quantity 750mm wide x 210mm deep 20 per pack 1500mm wide x 210mm deep 10 per pack
14
Flame Retardant Handrail and Newel Post protection
Flame Retardant Edgeguards and Stair Protection
Flame Retardant Foam Protectors can be used on internal or external handrails and newel posts in highly trafficked areas as well as Pillars and Frames to ensure that expensive finishes are not unnecessarily damaged. • Manufactured from highly visible orange foam flame retardant and certified TS63 • Offer full cover protection with a high level of impact resistance
Flame Retardant Edgeguards and Stair protectors are made from TwinShield which is certified to LPS 1207. Edgeguards provide an effective temporary protection to corners, giving a high degree of impact resistance. Stair Protectors are made from TwinShield board LPS 1207, giving temporary protection to treads and risers, protecting against foot traffic, maintaining a clean surface below.
• Minimises the need for costly and unsightly repairs
1207
n
APPROVED PRODUCT CF5032
Dimensions Pack Quantity 114mm Circular FR Orange foam 2m, 11 per pack 78mm Circular FR Orange foam 2m, 21 per pack 48mm Circular FR Orange foam 2m, 35 per pack
Description Edgeguards
Dimensions
75 x 75 x 1300mm 200 x 150 x 1200mm
3mm Stair Protectors
15
Adhesive Tape & Accessories
Ockwells Flooring Tape
See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages.
• Ockwells Flooring Tape Can be used to fix flame retardant protective materials to surfaces. • High Tack Flame Retardant Tape Generally used for polythene jointing, flame retardant.
• Easi-Peel Tape Plasticised polyvinyl chloride film tape coated with a high quality adhesive.
General purpose tape for jointing product to product. • Manufactured from very strong unplasticised PVC film • Coated with an aggressive natural rubber pressure- sensitive adhesive • Used as a general purpose tape on FloorShield, TwinShield and corrugated cardboard etc.
• Gaffer Tape Laminated waterproof polythene/cloth tape
High Tack Flame Retardant Tape Generally used in the construction industry for polythene jointing and shuttering tape. • Tapes have many other uses • Flame Retardant High Tack should be used for jointing of LPS 1207 flame protection materials. Rolls Per Box Description Length 50mm 75mm 100mm Ockwells Flooring Tape 66m 36 x x High Tack FR 33m 18 12 8
16
FR Gaffer Tape/Double sided Gaffer Tape
Easi-Peel PVC Protection Tape
Manufactured from plasticised polyvinyl chloride film and coated with a high quality adhesive. • Can be used on glass for short periods of up to 2 weeks and most other surfaces up to 4 weeks • Widely used in construction to fix protection materials to non-porous surfaces without leaving a residue • Has a unique grooved surface finish across the width which allows the tape to be torn without compromising its lateral strength.
Laminated waterproof polythene/cloth tape. FR Gaffer meets the requirements of F.A.R. 25.853(a) and M1 for fire-retardancy. • Coated with an aggressive pressure-sensitive adhesive • Suitable for heavy duty jointing applications • Seals protection materials to concrete and steel • Available in Black, Silver or White (FR available only in white).
Rolls Per Box
Description Length 50mm 75mm 100mm FR Gaffer Cloth Tape 50m 24 16 x Gaffer Cloth Tape 50m 24 16 8 Double Sided Gaffer 50m 24 x x
Rolls Per Box
Description 50mm 75mm 100mm Easi-Peel Standard 33m 18 12 8 Length
Industrial Cleaner Removes adhesive and tape. A single solution for removing difficult substances such as dried non-curing adhesive tape residue, grease and dirt etc..
Description
Dimensions
Industrial Cleaner
500ml
17
Accessories
Scaffold Sheeting
Flame Retardant Debris Netting
Knitted fabric with button hole eyelets for easy installation, designed to improve site safety by reducing the risk of small objects or tools falling outside the work area. • Open mesh reduces wind load on scaffold structures • White flame retardant netting to LPS 1215
Manufactured from reinforced low-density opaque flame retardant polythene sheeting.
1215
Description Debris Netting
Dimensions
• All grades incorporate strong reinforcing strips with pre-punched eyelets at close intervals for ease of fixing
2m x 50m
to traditional scaffold pole applications • Sheeting can be used as temporary screening on site compounds.
Scaffold Toggles
1207
1215
Description
Dimensions
Flame Retardant to LPS1207 & 1215
2m x 45m
Zip Ties
Use on vertical scaffold sheeting. • Manufacturer’s recommendations
should be followed when using elasticated toggles • Incorrect use can cause problems with wind loading.
Zip ties for fixing scaffold sheeting or debris netting to scaffolding.
Description
Dimensions 100 per pack 100 per pack
Description
Dimensions 100 per pack
Zip Ties 140mm x 3.6mm Zip Ties 360mm x 4.8mm
Scaffold Toggles
18
Notes
19
Scan Me
For expert advice on Marine Protection Materials, contact Nigel Chubb on 01635 876336 Email: sales@ockwellsmarine.com
For advice on other protection materials call one of our depots.
SOUTH Unit 6, Transigo Gables Way, Thatcham Berkshire RG19 4ZA T: 01635 876336 F: 01635 876338 E: sales@ockwells.co.uk
NORTH Unit 29, Melford Court Woolston, Warrington Cheshire WA1 4RZ
SCOTLAND 231 Maclellan Street Kinning Parkway Estate, Glasgow G41 1RR
T: 0141 427 3366 F: 0141 427 8455 E: sales.glasgow@ockwells.co.uk
T: 01925 820003 F: 01925 822050 E: sales.warrington@ockwells.co.uk
www.ockwellsmarine.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20Made with FlippingBook - Online catalogs