Door Protection
Flame Retardant Hard Surface Protection Film
In this section there are a range of marine and offshore protection materials for use on both internal and external doors. See list below for a guide to the products in this section. You will also find a full description of each product and their certification on the following pages.
• Hard Surface Protection Film Flame Retardant
Can be used on floors and other hard surfaces and is certified to 1121/11 164.112/1121/WCL/MED0329.
n
Certified to TS63 approved product CF 748
• TwinShield Flame Retardant
Can be used on doors and other hard surfaces and is certified to
LPS 1207. Made from polypropylene which is recyclable.
1207
• Flame Retardant Door Sleeves Polythene door sleeves certified to LPS 1207.
Ockwells Flame Retardant Hard Surface Protection Film has been developed to protect doors in areas under construction and refurbishment. This protection is manufactured from flame retardant polythene film with a special low tack adhesive back that is designed to protect hard surfaces on a temporary basis without leaving a residue. • Do not apply to wet or damp areas. • Before film application, floors should be clean and free from dust, dirt and loose debris. • Hard Surface Protection Film should be replaced every 4 weeks when used on floors, every 24 weeks on internal glass and every 12 weeks on external glass.
1207
• Flame Retardant Foam Protection Foam door frame protection flame retardant.
n
Certified to TS63 approved product CF5032.
All the products in this section are Flame Retardant and Water Resistant
n
1121/11 164.112/1121/ WCL/MED0329
APPROVED PRODUCT CF 748
Description
Dimensions
FR Hard Surface Film
600mm x 100m
9
Made with FlippingBook - Online catalogs