TRAMPOLINE & TUMBLING
Kyle Shewfelt Gymnastics Center
Calgary, Alberta
Product: In-Ground Trampoline & Loose Foam Pit
LOOSE FOAM & IN-GROUND PITS
Spieth America offers customized loose foam, in-ground resi pits.
The foam pit trampoline frame is constructed of angle iron with 1/4” round rod, zig-zag wire welded on for spring attachment and pre-drilled with holes for easy attachment to pit walls. Wedge bolts are also available for your convenience to use with trampoline pit frames when anchoring into concrete walls. The bed is made from polypropylene material. Spring attachments are spaced approximately 4 1/4” apart and set back from the edge leaving a flap to go over the top of the springs. The flap has holes approximately every two feet so it can be secured in place. Pit Edge padding is either carpet bonded foam or vinyl draping. Custom solutions are available. The foam cubes come in two sizes - 6” or 8”. The pit edge padding consists of the same material as our Carpet Bonded Foam (see page 43). Each panel is 6’ long and 2” or 1 3/8” thick and secure to the wall with a contact adhesive. Sections come precut flat for easy use and installation. FOAM PIT CUBES PIT EDGE PADDING
IN-GROUND TRAMPOLINES In-ground trampolines are level with the floor or pit and are available in 7’ x 14’ with a black poly bed or Dave Ross String Bed. Full pads and 120 springs are included.
151
151-06
Pit Edge Padding 6' x 3' x 1 3/8" Pit Edge Padding 6' x 3' x 2"
6" x 6' Foam Pit Cube
151-08
8" x 8' Foam Pit Cube
151A
UAI-IGT-BPB
7' x 14' with Black Poly Bed
UAI-IGT-DRB
7' x 14' with Dave Ross String Bed
SOFT TOP PIT MODULES
STPM51024
Soft Top Pit, 5' x 10' x 24"
STPM61224
Soft Top Pit, 6' x 12' x 24"
STANDARD PIT MODULES Each available 18", 24", and 32" high
Standard
Width
x Length
5' x 10' 7.5 x 12' 7.5' x 16' 8' x 16'
spiethamerica.com
61
Made with FlippingBook flipbook maker