CHAIN TENSIONERS
FIR UNIVERSAL PVC CHAIN PAD Long lasting chain wear pad with raised sides for guiding the chain in the deepest of muds or ruts. PVC constructed. • Suitable for chains 415 - 520 • Hard wearing injection moulded • Classic type Bultaco • Size: Gap for chain 22mm wide, overall length 60mm x overall height 46mm • Holes for fitting 40mm wide 2x6.5mm Advantages of PVC: • PVC has good hardness and mechanical properties • Very high chemical & moisture resistance Part No. 11-784
FIR UNIVERSAL CHAIN TENSIONER KIT • Universal Chain Tensioner Kit with roller and spring • Chain Roller diameter 28mm / width 26mm between shoulders • 2 sealed bearings
FIR CHAIN BLOCK • Universal Chain Block, Black • Used on many chain tensioners • Universal replacement wear pad, for use with chain sizes 415-520 up to 22mm wide • Made from high impact, durable plastic • Fitted with heavy duty spring, 3.6mm wire • Top pivot bushing has 12.5mm bolt hole • Bolts onto swingarm and the roller adjusts up and down to tension the drive chain Part No. 11-787
11-784.EACH
• Size: Overall length 60 mm x Inside 21.30mm x Outside width 30mm • Boss thickness 18mm with 7mm holes (centre to centre 40mm) Part No.
11-793.FIR
11-791
Trade Pack of 10.
11-791.C/PK10
FIR UNIVERSAL CHAIN TENSIONER KIT • Chain tensioner kit with spring & HD deep long lasting pad • Overall length 150mm, M8 pivot bolt • MX / Enduro / Trials / Street • Very useful custom part, takes the slack out of your chain, especially on rigid frames where minimal clearances cannot be avoided • Steel body with BZP gold finish • High quality heavy duty • These are not cheap quality as sold elsewhere • Replacement pads available please call • Note: Not suitable for chain widths over 20mm Part No. 11-795 Trade Pack of 5. 11-795.PK5 FIR UNIVERSAL CHAIN TENSIONER KIT A universal chain tensioner kit with roller and clamps Bolts onto the swingarm and the roller adjusts up and down to tension the drive chain Part No. 11-793
11-791.C
FIR UNIVERSAL CHAIN TENSIONER PAD Spring loaded chain tensioner kit to fit any bike Note: May need to be aligned with chain after mounting • Complete assembly including tensioner arm • Supplied with pad • Spring, nut and bolts included • Zinc plated steel arm for maximum durability • Ideal for trial or trail bikes / older type bikes Part No. FIR CHAIN TENSIONER ROLLER Spring loaded chain tensioner kit to fit any bike Note: May need to be aligned with chain after mounting Left Hand Tensioner Roller
11-797
11-799.LH
11-799.LH 11-799.RH
Right Hand Tensioner Roller
212
Made with FlippingBook - professional solution for displaying marketing and sales documents online