COMPLETE CATALOGUE
CLUTCH & PRIMARY GEAR PULLER
Removal tool for clutch and primary gears, flywheel and clutch bodies. This tool has 7 different holes for adjusting position. Set includes 5/8” puller bolt and 3x6mm bolts. For use on 50cc KTM, LEM, Cobra, Action and Italjet 50cc Pee-Wee racing models.
00-098.DR
CLUTCH & PRIMARY GEAR PULLER
00-098.DR
COUNTER BALANCER/CLUTCH HUB SPANNER
Counter balancer and clutch hub spanner for Honda. Replaces 20mm end of Honda OEM Tool; 07716-0020100. Used to remove Honda OEM nut; 90231-KY4-900 4-pin spanner made of heat treated steel. Inside diameter is 20mm. Use with 3/8” driver. Fits counter balancer nut on; CRF450R 2002-2006, and CRF450X 2005. Fits clutch hub nut on; PC50-69-70, Z50 1968-1999, S65 65-69
00-490.DR
COUNTER BALANCER/CLUTCH HUB SPANNER
00-490.DR
CLUTCH HOLDING TOOL
A clutch holding tool is used for the disassembly and assembly of the clutch, this tool is used to hold the clutch enabling the retaining nut to be removed or tightened without damage to the parts. - Carbon Steel.
00-9021
CLUTCH HOLDING TOOL
00-9021
DEGREE KEY
Timing Ignition Degree Key Fits all years Yamaha Banshee 350. The Team alba offset timing degree key gives you an extra 4 degrees of advanced timing. You will gain between 2 and 2.5 H.P. at the wheels. Installation is easy, but be sure to use the proper flywheel remover tool. Universal tools will break your flywheel.
DEGREE KEY
82-8300
82-8300
WOODRUFF KEY
FIR Woodruff key. Available in 2 sizes; 3 x 6.5 x 16mm OR 3 x 5.00 x 13mm.
Woodruff Key 3x6.5x16mm Woodruff Key 3x6.5x16mm Woodruff Key 3x5.0x16mm Woodruff Key 3x5.0x16mm
44-468.EA
44-468.PK10
44-469.EA
44-468.EA
44-469.PK10
319
Made with FlippingBook - professional solution for displaying marketing and sales documents online