COMPLETE CATALOGUE
DUAL CHAMBER FORK CAP WRENCH 50mm
This tool has a12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. Sold Each. • 50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM’s • 12 mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg • Made from billet 6061-T
00-872.DR
DUAL CHAMBER FORK CAP WRENCH
00-872.DR
FORK DAMPING ADJUSTING TOOL
This adjusting tool is flat and has a tip on the bottom so it easily fits between the handlebar and top of the fork tube on almost all setups.
FORK DAMPING ADJUSTING TOOL
00-7822
00-7822
FORK INTERNAL DRIVER TOOL
00-8760.FIR
• • • • • • • • •
Used to Adjust KTM shocks WP White Power Used to replace the inner fork spring
Damper Assembly tool
Go-through hole as socket sacks
Over All Length 180mm
Hex Drive 24mm
Centre Hole Bottom 12mm / Top 19mm
4 pins Dia. 4.8mm each
Made from Carbon Steel & BZP finish
FORK INTERNAL DRIVER TOOL
00-8760.FIR
FORK OIL SYRINGE
Fork oil syringe. To add or remove oil accurately and easily. Ideal for forks and shocks. Accurate to 60ml.
00-021.EA
FORK OIL SYRINGE
00-021.EA
FORK OIL SYRINGE (TRADE PACK OF 10)
00-021.PK10
FORK OIL SEAL DRIVERS
Designed for easy installation of most fork seals on either conventional or inverted forks in 39, 41, 43, 45, 46/47 and 49/50mm configuration. Manufactured from plated carbon steel, featuring split design and weighted body. Sold individually.
35/36mm SEAL DRIVER 43mm SEAL DRIVER 46/47mm SEAL DRIVER 48mm SEAL DRIVER 49/50mm SEAL DRIVER
00-818
00-811.DR 00-813.FI 00-832.DR 00-914.FI
00-818
FORK OIL LEVEL GAUGE
Fir Fork Oil Level Tool. For checking and adjusting the oil level on all conventional and single chamber cartridge forks Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments Syringe has a capacity of 60ml can be used on bicycles equipped with front suspension.
00-802
OIL LEVEL GAUGE
00-802.FI.EACH 00-802.FI.PK10
OIL LEVEL GAUGE (TRADE PACK OF 10)
327
Made with FlippingBook - professional solution for displaying marketing and sales documents online