8.4 Torque rudder data
Name: Contact:
Number of Rudders: . ............................ Rudder Cross Section: Foil Flat Plate
Displacement Hull: . ................................ Yes No Planning Hull: . .......................................... Yes No Sail Boat: .................................................... Yes No Catamaran: ................................................ Yes No Vessel – Length: ...................................... ft. Vessel – Make/Model: Vessel – Top Speed: .............................. Knots Vessel – Cruising Speed: ..................... Knots
Other (please specify)
Estimated load per rudder: ................. ft-lbs. (It is suggested that you confirm load with your Naval Architect.) Perpendicular distance from the rudder shaft to the propeller: ................ ft. in. (See figure 8-25, dimension ‘A’.)
Distance parallel to the rudder shaft from rudder base to the center of lower rudder bearing .............
Vessel – Displacement: . ....................... Vessel – Use: ............................................ Number of Engines: . ............................. Each Engine Shaft Horsepower ............
ft.
in.
(See figure 8-25, dimension ‘B’.)
Perpendicular distance from the waterline to the rudder base: .............
ft.
in.
HP
(See figure 8-25, dimension ‘C’.) Rudder drawing included: . ................................ Yes (See notice below left.)
Prop. Diameter: . .....................................
in.
Rudder Arc: (Midship to Hardover)............
Degrees
COUNTERBALANCE
LOWER RUDDER BEARING
WATERLINE
C
L
C
L
C
B
Print/scan completed form and a detailed dimensioned rudder drawing. email to: marinetech@dometic.com or, fax to: 1-800-730-4082
A
Figure 8-25.
NOTE See reverse side (page 8-20) for important Warning and Notice.
8-19
EN
Made with FlippingBook - Online Brochure Maker