10.2 SeaStar hose
SeaStar and SeaStar PRO steering hoses are available in kits (two, equal lengths of hose per kit). Before ordering you must consider the following areas to ensure that you order the correct length for the cleanest installation. In all applications, hydraulic hose/tubing should be secured along the routing path where possible and should not be allowed to hang free in any area where they may become a safety hazard. Dometic recommends the use of a rigging tube, PVC piping or conduit for the safe installation and protection of the steering hose/tube. Do not install hoses in such a way that they become exposed to high heat areas such as engine components (i.e. manifolds or exhaust components), or in highly corrosive areas such as battery fumes or electrical connections. Each part number contains two hoses of equal length. SeaStar Solutions offers two different types of steering hoses; • Standard (straight line hoses, not passing through bulkheads) from 2’ to 5’ (1’ increments ), 6’ to 30’ (2’ increments), both SeaStar standard and SeaStar PRO available. • Bulkhead hoses (for use where the hose is required to pass through a bulkhead). Available from 2’ to 5’ (1’ increments) 6’ to 30’ (2’ increments), both SeaStar standard and SeaStar PRO available. NOTICE! SeaStar bulkhead hoses provide the cleanest hose routing through the splashwell or transom. WARNING! SeaStar PRO helm systems require the use of SeaStar PRO (1500 psi) reinforced Kevlar hoses only.
10.2.1 Field installed bulkhead fitting kits
Dometic field installed bulkhead fitting kits are available in for either single or dual hose applications. Offering boaters a simple solution to cleanly route hoses through the hull while maintaining safety and aesthetics.
PART # DESCRIPTION HO7100
Field installed bulkhead, single hose, pair, stainless bezels
HO7105
Field installed bulkhead, single hose, pair, plastic mounts
HO7200 Field installed bulkhead, dual hose, stainless bezel HO7205 Field installed bulkhead, dual hose, plastic mount Table 10-2. • Split grommet design allows for easy installation onto a hose assembly. • Split pigtail with snap fit tabs provides positive feel. • Increased inner diameter of plastic base plate allows crimped hose fitting to pass through the base plate. • Stainless steel cover plates are available for both single and dual applications, providing cleaner styling and corrosion resistance while blending in with the boat’s stainless trim.
10-2
EN
Made with FlippingBook - Online Brochure Maker