10.2.2 Bulkhead hose kits
TO HELM PUMP
BULKHEAD MOUNTING PLATE
DUST CAP
#10 SCREWS CUSTOMER SUPPLIED
HOSE FITTING
BEND RESTRICTOR
BULKHEAD
TO CYLINDER
PIGTAIL FITTING
HOSE FITTING
DUST CAP
Figure 10-6. HO88XX dual polished plate shown.
10.2.3 How to order SeaStar hose kits
Each part number contains two hoses of equal length.
PART #
KIT DESCRIPTION
* *
HO51XX HO57XX HO81XX HO82XX HO86XX HO87XX HO88XX HO89XX
SeaStar standard outboard hose kit (2 hoses) SeaStar PRO hose Kit (2 hoses) SeaStar bulkhead hose kit, standard (2 hoses) SeaStar bulkhead hose kit, PRO (2 hoses)
** ** ** ** ** **
SeaStar bulkhead hose kit, polished plate (2 hoses) SeaStar PRO bulkhead hose kit, polished plate (2 hoses) SeaStar bulkhead hose kit, polished plate double (2 hoses) SeaStar PRO bulkhead hose kit, polished plate double (2 hoses)
Table 10-3. * SeaStar standard and PRO hose kits are available in lengths from 2’ – 30’. ** SeaStar standard and PRO bulkhead hose kits are available in lengths from 4’ – 30’. XX = Substitute length required in feet. 2–8 feet, in 1 foot increments. 8–32 feet, in even numbers. NOTICE! Outboard hoses are supplied with pre-attached hose fittings on both ends In order to prevent hose kinking, bend restrictors are supplied on one end of each hose in the kit. The end of the hose with the bend restrictor is to be attached to the cylinder.
HOSE FITTING
HOSE
BEND RESTRICTOR
Figure 10-7. Standard hose kit.
10-5
EN
Made with FlippingBook - Online Brochure Maker